BLACK WEEK at Swords and more -%- special prices until November 24th

Welcome to Swords and more


Here you will find thousands of articles with and without a blade. We carry anime swords and weapons of all kinds as well as all articles of many great brands from the knife and blank weapon range, Cold Steel, CAS Iberia, Windlass, Haller Stahlwaren, Böker and many more.
We hope you enjoy shopping and we are always at your disposal for any questions.

BLACK WEEK


Herzlich willkommen

%
back on stock
Wado-Ichi-Monji by Roronoa Zoro katana
Geisha’s Blade hand forged and fully sharpened version of the Wado Ichimonji Katana, which is one of the swords of Roronoa Zoro, a character from the popular anime/manga: One Piece. This is a sword of great personal importance to Roronoa Zoro, and it was once Kuina’s and her family’s sword. It is one of the twenty one O Wazamono grade swords (One Piece world). Upon Kuina’s death, Zoro asked for it from her father. As one of the twenty one finest katanas in the One Piece world, Wado Ichimonji is a powerful blade when used by a competent swordsman. It is also quite durable, as shown when Dracule Mihawk’s Kokuto Yoru shattered two of Zoro’s swords, this is the only one that did not break at all. When used by Zoro, this sword is usually placed in his mouth for his Santoryu. When using his Ittoryu, Zoro usually uses this sword for it. Its toughness is further demonstrated by the fact that Zoro used it for his Itto-Ryu Iai: Shishi Sonson technique against Mr. 1, cutting through his steel body. • Blade Material: 1050 carbon steel (semi black coated mono-steel) • Edge: sharp or dull as per customers demand • Overall Length w/ saya: 97 cm • Blade Length: 67 cm • Handle Length: 26 cm • Saya: 30 inches glossy white lacquered finish • Tsuba / Fuchi / Kashira / Kojiri: Zinc alloy • Habaki / Seppa: Brass • Tsukaito: White synthetic silk • Samegawa: Synthetic ray skin panels • Weight: 0.92 kg

From €55.20* €69.00* (20% saved)
Ensure 56 bonus points

this item is in stock
delivery before Christmas!

%
The Elder Scrolls V: Skyrim - Daedric Dagger
Mysterious knights in full armor roam the frozen land of Skyrim. In their presence mere mortals are filled with fear, for they are Deadry, which the people of Skyrim call rather demons. These creatures wear special black armor and have their own arsenal of weapons that are not only deadly but also devilishly beautiful and cool. And our shop now brings you one item from this arsenal, the "DAEDRIC DAGGER" dagger! A beautifully crafted dagger from the world of The Elder Scrolls. A tool used in the game by the terrifying knights called the Dead, as well as the main character Dragonborn. This is a 1:1 replica with the original dagger, the length of the entire weapon is 60 cm, so it is no small thing. Curved blade with a length of 38 cm. it is not sharpened, as it is an exhibition replica and therefore we do not recommend sharpening the blade. The whole dagger is decorated in detail just like the game original. The handle of the dagger fits comfortably in the hand and therefore you can use the dagger in addition to exhibition purposes as an accessory to cosplay. The dagger weighs 1.42kg, making it a really massive piece! :) The dagger also includes a wooden plaque decorated with the Daedric symbol. The package also includes screws and dowels, thanks to which you can comfortably hang the plaque on the wall, either in your living room, playroom or under the pergola. Now you too can become a Dragonborn, grab the "DAEDRIC DAGGER" and go to Skyrim for adventure! Details: Total length: 62 cm Handle length: approx. 12 cm Blade length: approx. 38 cm Weight: 1.42 kg

€47.20* €59.00* (20% saved)
Ensure 48 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Tatami Omote - high quality - 5 pieces
This mat is made from rice straw and can be used for the traditional japanese cutting test tameshigiri. The mat has a dimension of 180*70-90cm. The mats come loose in a bag. This tatami omote is the high quality. After our experiences in cutting tatami omote during the last years we have decided to offer different qualities of tatami omote. By this we can make sure that each and every cutting customers will be satisfied. The experienced cutter can buy and cut this mat without any problems. The advantages are obvious : - not pre rolled, can be rolled individually - high density, high withstood when cutting - challenging to cut - can be rolled up to 7 or more times into each other in order to make big targets We recommend this tatami omote to all customers practicing tameshigiri on a regular basic, to everybody who is looking for a hard to cut target and to every martial arts practicioner who wants to check his technique. When you compare the 2 kinds of tatami omote, basic and high quality, then you will quickly realize that the basic quality tatami omote has only half the withstood the high quality has. Or in other words to say, the high quality is twice the hard to cut as the basic quality. The reason for this lies directly in the structure of the omote. The high quality has a much higher density than the basic quality. If you want to order larger quantities than 200 mats please ask for our offer.

€38.32* €47.90* (20% saved)
Ensure 39 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Tatami Omote - high quality
This mat is made from rice straw and can be used for the traditional japanese cutting test tameshigiri. The mat has a dimension of 180*70-90cm. The mats come loose in a bag.This tatami omote is the high quality. After our experiences in cutting tatami omote during the last years we have decided to offer different qualities of tatami omote. By this we can make sure that each and every cutting customers will be satisfied. The experienced cutter can buy and cut this mat without any problems.The advantages are obvious :- not pre rolled, can be rolled individually- high density, high withstood when cutting- challenging to cut - can be rolled up to 7 or more times into each other in order to make big targetsWe recommend this tatami omote to all customers practicing tameshigiri on a regular basic, to everybody who is looking for a hard to cut target and to every martial arts practicioner who wants to check his technique.When you compare the 2 kinds of tatami omote, basic and high quality, then you will quickly realize that the basic quality tatami omote has only half the withstood the high quality has. Or in other words to say, the high quality is twice the hard to cut as the basic quality. The reason for this lies directly in the structure of the omote. The high quality has a much higher density than the basic quality.If you want to order larger quantities than 200 mats please ask for our offer.

€7.92* €9.90* (20% saved)
Ensure 8 bonus points

this item is in stock
delivery before Christmas!

%
Star Trek: the new generation - Klingon Bathlet
This Klingon bathlet is a masterpiece of a Star Trek Weapon. It was not only used in The Next Generation Series of Star Trek. All measures are subject to estimation. Details: Total length: 130 cm Weight: 2.5 kg Blade Material: Steel

From €71.20* €89.00* (20% saved)
Ensure 72 bonus points

this item is in stock
delivery before Christmas!

%
Zhanshi Bloodwood Assisted Opening Pocket Knife
Illustrating the balance of two of earth’s most important resources, our Shinwa Zhanshi Bloodwood Assisted Opening Pocket Knife also feels perfectly balanced in your hand. The knife has a 10 cm keenly sharp dark grey stainless steel blade with a raised rain-drop like pattern and double thumbstuds. The handle scales are of a reddish-brown wood, secured with metallic blue screws to match the metallic blue liners. The assisted opening pocket knife is 12 cm when closed and features a sturdy metallic blue pocket clip for ease of carry. Details: Closed Length: 12 cm Blade Length: 10 cm Blade Material: stainless steel

€34.99* €49.99* (30.01% saved)
Ensure 35 bonus points

this item is in stock
delivery before Christmas!

%
Bleach - Ichigo Shikai Cutting Moon Zangetsu Sword
The final form of Inchingo's Zangetsu, named Tensa Zangetsu (Chains Of Heaven-Slicing Moon), is considered completely out of the ordinary for any zanpakut ichigo's final release appears to be a compression of his power, rather than a vast expansion as other final releases are. This hugely compressed power enables Ichigo to move at an incredible speed, surpassing flash steps, and gives him an agility and reflexes to match, while allowing him to use his strength to its limits. The Tensa Zangetsu is consists of an ordinary katana with a black blade, a handguard in the shape of the manji, which is the kanji for "ban" (full), and a short broken chain dangling as the blade's tassel and replacing the cloth from its released form. Details: Overall length: 100 cm Blade length: 71.5 cm Handle length: 28.5 cm Weight: 800 Gramm

From €55.20* €69.00* (20% saved)
Ensure 56 bonus points

this item is in stock
delivery before Christmas!

%
Odachi Sword - handforged & folded, Set
Odachi or Nodachi, both names refer to the same sword. The Odachi is known for being a very long sword (the average length is between 165-178 centimeters). Various historical traditions show that the Nodachi instilled fear in the enemies. Our Odachi is a hand forged, heat treated carbon steel blade. The sword is sharp and fully operational. The handle is extra long for two-handed use. That's a real sword. This Odashi is truly stunning. The impressive length, real hamon, the rectangular tsuba with natural stone finishing, the tsuka (double-fastened) covered with cotton and real ray skin, wooden saya with black-speckled lacquer. Are you ready to give your samurai costume or house decor a new hot touch? The sword was made with great care. The best gift for collectors, samurai, ninjas, cosplayers and as a gadget for a costume party. You can use it for any occasion like Comic-Con, costume parties, cosplay events, Halloween or just to show off a great sword in front of your guests. Product Details: - Blade material: hand-forged 1050 carbon steel blade - Tsuba: rectangular tsuba with natural stone treatment - Tsuka: wooden tsuka wrapped with cotton and real ray skin (double attached) - Saya: wood with black speckled finish - Total length: 173 centimeters - Blade length: 121 centimeters - Length of the handle: 44 centimeters - Weight: 1.68 kilograms - Blade width (tsuba): 3.1 centimeters - Blade thickness (tsuba): 1.3 centimeters - Blade thickness (before Habaki): 0.9 centimeters - Focus: 28 centimeters (from Habaki) - A display stand - A grooming kit containing oil, powder puff (Uchiko), cleaning paper (Nuguigami), and brass hammer (Mekuginuki)

€135.20* €169.00* (20% saved)
Ensure 136 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Practice Broadsword
Having a high quality and safe tool to practice your sword skills with is of the utmost importance! You shouldn’t have to worry about safety when you are working to become a master of the sword. Constructed from the highest grade of polypropylene available and closely mimicking an actual Medieval broadsword in length, size, weight, and feel, our practice sword has the advantage of being virtually unbreakable, as well as, remarkably stiff and cut resistant. It will take years and years of abuse! Having a high quality and safe tool to practice your sword skills with is of the utmost importance to your overall training Balanced and weighted to mimic real broadsword, it is solidly crafted of the highest grade of polypropylene The training tool is virtually unbreakable, remarkably sturdy and will take years and years of the abuse you dish out The heavy-duty training broadsword features a textured handle for a secure grip and it is 43 1/2” in overall length

€59.92* €74.90* (20% saved)
Ensure 60 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Final Fantasy VII - Buster Sword
This is the Buster Sword from the game series “Final Fantasy”. The Buster Sword is a weapon that first appeared in Final Fantasy VII and has since appeared in several other games in the series. It is Cloud Strife's trademark weapon, and was wielded before him by Zack Fair and Angeal Hewley. The Buster Sword serves as an iconic image for Cloud and Final Fantasy VII due to its massive size and is wielded by Cloud in most of his appearances. The Buster Sword is classified as an enormous broadsword. From tip to handle, it is approximately five to six feet long, with a single-edged large blade approximately one foot wide. In Cloud's Final Fantasy VII artwork, the blade is a lighter color on the bladed edge, while the rest of the blade is dark gray, and the handguard appears to be bolted or riveted into place. There are two holes near the handguard, variably said to be Materia slots, or where Cloud clips the sword onto his back. This design of the Buster Sword is used in most spin-off appearances. In the Kingdom Hearts series, Cloud wields a Buster Sword of this design wrapped in bandages. Details: Overall length: 134.5 cm Blade length: 95 cm Handle length: 32.5 cm Material: Steel Weight: 5.25 kg

From €127.20* €159.00* (20% saved)
Ensure 128 bonus points

this item is in stock
delivery before Christmas!

%
Highlander - Duncan MacLeod Sword Set
Duncan MacLeod is a fictional character from the Highlander multiverse. The sword of Duncan Mac Leod is a katana, featuring a dragon's head, which was given by Samurai warrior Hideo Koto in 1778 during his travels to Japan. Duncan should have inherited the Claymore of his (adoptive) father, Chieftain of the Clan MacLeod, but because he was exiled the sword was instead kept within the clan. (In one episode he finds his father's claymore hanging as an antique in a Scottish tavern, and uses it to kill the immortal who killed his father some time after he was exiled). In fact, Duncan usually tries to avoid killing mortals even when he is forced to fight them, and goes out of his way to use non-lethal methods. The Daisho are the traditional arms of the samurais, composed of katana and wakizashi. Samurai is a common term for a warrior in pre-industrial Japan. A more appropriate term is bushi (lit. "war-man") which came into use during the Edo period. However, the term samurai now usually refers to warrior nobility, not, for example, ashigaru or foot soldiers. The samurai with no attachment to a clan or daimyo was called a ronin. Total lengths : 103/83/54 Blade lengths : 66/47/27 The wooden stand somes with the Daisho.

€55.20* €69.00* (20% saved)
Ensure 56 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Sword of the ghosts
After the sword of the ghost king now also the sword that the other ghosts use. Full of cruel beauty is this long sword. Frayed by the years and drawn by the ravages of time, this weapon has a very special kind of splendor to offer ... Details: Total length: approx. 135 cm Blade length: approx. 100 cm Material: Stainless steel

From €95.20* €119.00* (20% saved)
Ensure 96 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Tatami Omote - high quality - 20 pieces
This mat is made from rice straw and can be used for the traditional japanese cutting test tameshigiri. The mat has a dimension of 180*70-90cm. The mats come loose in a bag.This tatami omote is the high quality. After our experiences in cutting tatami omote during the last years we have decided to offer different qualities of tatami omote. By this we can make sure that each and every cutting customers will be satisfied. The experienced cutter can buy and cut this mat without any problems.The advantages are obvious :- not pre rolled, can be rolled individually- high density, high withstood when cutting- challenging to cut - can be rolled up to 7 or more times into each other in order to make big targetsWe recommend this tatami omote to all customers practicing tameshigiri on a regular basic, to everybody who is looking for a hard to cut target and to every martial arts practicioner who wants to check his technique.When you compare the 2 kinds of tatami omote, basic and high quality, then you will quickly realize that the basic quality tatami omote has only half the withstood the high quality has. Or in other words to say, the high quality is twice the hard to cut as the basic quality. The reason for this lies directly in the structure of the omote. The high quality has a much higher density than the basic quality.If you want to order larger quantities than 200 mats please ask for our offer.

€143.20* €179.00* (20% saved)
Ensure 144 bonus points

this item is in stock
delivery before Christmas!

%
Squall Leonharts Gun Blade Sword
Now you too can join the special combat unit of the Balamb Garden Military Academy. Once you take hold of this rare find your rivals will fall prey to fatal Rough Divide and Fated Circle attacks. Every bit as unique and deadly as Squall, this product is a rare find at an exceptional price! Product Info: * Overall Length: 39" * Blade Length: 27" Handle Length: 17 cm Weight: 1.88 kg * Steel: 440 Stainless

From €71.20* €89.00* (20% saved)
Ensure 72 bonus points

this item is in stock
delivery before Christmas!

%
USMC Ceremonial Sword
The officially licensed USMC Ceremonial Saber Sword from United Cutlery makes an excellent, heirloom quality gift to present to the Marine in your life. The sharp, 29 1/4" stainless steel blade is embossed with USMC themed artwork, which includes “United States Marines”. The hilt is polished stainless steel with a TPU grip with faux wire wrap and a guard with decorative metalwork and a tassel. The matching scabbard is of black faux leather and features stainless steel decorative accents. The USMC Ceremonial Saber Sword looks great displayed in your home or at the office. Officially licensed USMC saber sword great for gifting Sharp 29 1/4" stainless steel USMC embossed blade Faux black leather sheath; stainless steel accents Stainless steel hilt with metalwork details Black TPU grip with faux wire wrap Overall length: 35”

€101.15* €119.00* (15% saved)
Ensure 102 bonus points

this item is in stock
delivery before Christmas!

%
Stand for Thor's hammer
This is the modern version of the hammer “Mjölnir” of the Norse god “Thor” known from several myths and movies. In Norse mythology Thor or Donar is the God of Clouds, Thunder and Fertility and like all other Aesir he died during the Ragnarök. Only Odin stood above him and more feared. He was the son of the Aesir Odin and the human Jörd and therefore the blood of Asgard and Midgard flows through him. Thor’s realm in Asgard is called Thrudvangr. There he lived with his wife Sif in the biggest palace of Asgard, “Bilskirnir”. Thor’s most famous weapon was his divine hammer “Mjölnir” that was the source of his power. He also owned the belt “Megingjörð” that increased his power even more. His trademark though was the thunder that announced his arrival when he used his goat carried chariot. There are many legends about his heroic deeds like his first fight against the Midgard Serpent, his feud with the ice giants or how he and Loki used a trick to get his stolen hammer Mjölnir back from Trym, the giant. Like all Aesir Thor found his end during the Ragnarök, the Fate of The Gods. He fought against the Midgard Serpent and won but then he fell into its venom which eventually killed him. Please note: This is ONLY the stand for the hammer, you can also find the matching hammer in our shop.

€31.92* €39.90* (20% saved)
Ensure 32 bonus points

this item is in stock
delivery before Christmas!

%
Tip
Thor Hammer
This is the modern version of the hammer “Mjölnir” of the Norse god “Thor” known from several myths and movies. In Norse mythology Thor or Donar is the God of Clouds, Thunder and Fertility and like all other Aesir he died during the Ragnarök. Only Odin stood above him and more feared. He was the son of the Aesir Odin and the human Jörd and therefore the blood of Asgard and Midgard flows through him. Thor’s realm in Asgard is called Thrudvangr. There he lived with his wife Sif in the biggest palace of Asgard, “Bilskirnir”. Thor’s most famous weapon was his divine hammer “Mjölnir” that was the source of his power. He also owned the belt “Megingjörð” that increased his power even more. His trademark though was the thunder that announced his arrival when he used his goat carried chariot. There are many legends about his heroic deeds like his first fight against the Midgard Serpent, his feud with the ice giants or how he and Loki used a trick to get his stolen hammer Mjölnir back from Trym, the giant. Like all Aesir Thor found his end during the Ragnarök, the Fate of The Gods. He fought against the Midgard Serpent and won but then he fell into its venom which eventually killed him. Details: Head: 23x12 cm Total Length: 39 cm Handle Length: 27 cm Weight: 1.65 kg

€69.00* €99.00* (30.3% saved)
Ensure 69 bonus points

this item is in stock
delivery before Christmas!

%
Hibben Cleaver Blood Wood Version
Knife Masters Gil and Wes Hibben continue to put out innovative designs, which become legends in their own right! The Hibben Legacy Bloodwood Cleaver Knife is all about having supreme control from the finger-grooved handle that fits comfortably in your palm to the finger ring integrated into the capable blade design. It has a 5 7/8”, full-tang 5Cr15MoV stainless steel cleaver blade with a mirror-polished finish and beveled edges. The reddish brown wooden handle scales are secured to the tang with heavy-duty stainless steel pins and there is a lanyard hole. The 10 3/4” overall cleaver knife can be carried and stored in its premium black leather belt sheath, which has the Hibben Knives logo. Details: Total length: 27.3 cm Blade material: 5Cr15MoV stainless steel Blade length: 15 cm

€79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
Tip
back on stock
Witcher - Steel Sword with scabbard
The Witcher (Polish Wiedźmin) is a computer game of the Polish development studio CD Projekt RED. It is based on a book series by the Polish fantasy writer Andrzej Sapkowski about the witcher and monster hunter Geralt von Riva. The main character of the narrative is the scrawny wizard Geralt von Riva, who is a professional monster hunter. His hallmarks are his long white hair and two swords on his back, one of silver and one of steel. The Silver Sword serves as a weapon against all sorts of monsters, since most of the monsters that are encountered are very sensitive to silver, while the Steel Sword is used to fight human opponents. This is the steel sword made of steel of the witcher Geralt von Riva. Delivery with scabbard. Details: Overall length: 117 cm Overall weight: 1.26Kg Blade length: 91cm Blade width: 5.2cm Blade thickness: 4mm Handle length: 21cm Guard length: 24.8cm Handle material: hard wooden wrapped with brown wax cord Scabbard length: 98cm

From €79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
Klingon Bathlet II
This is the Klingon Bathlet of Honour which is the Klingons´ most valuable weapon. The Bathlet is very heavy and extremely mighty! The blade is made ​​of silver steel. Total length: 108 cm

From €79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
Hibben Drop Point Pro Hunter Knife
Gil Hibben knows hunting knives and that's a fact! The Hibben Drop Point Pro Hunter Knife is exactly what you need at your side when you're out during hunting season. The modified, drop point blade has a mirror-polished finish and the half-guard is satin-finished stainless steel. The handle is ergonomically finger-grooved and there's a stainless steel insert lanyard hole for another option of carry or to add a wrist lanyard. A belt black leather belt sheath with a basketweave design and double top-stitching houses the blade of the hunting knife. Details: 11,43 cm, razor-sharp 5Cr15 stainless steel blade Features black wood handle scales with red G10 liner 22,22 cm overall length Includes genuine leather belt sheath

€71.20* €89.00* (20% saved)
Ensure 72 bonus points

this item is in stock
delivery before Christmas!

%
Link Master Hylian Sword from Zelda
If you are a fan of Zelda then you will want to add this great piece to your collection. Can you really have too many Zelda collectibles? This master sword with display plaque will make a fabulous gift for Zelda fan. Details: Overall Length: approx. 94 cm Blade Length: approx. 63.5 cm Handle Length: approx. 17.8 cm Blade Style: Unsharpened Blade Material: Stainless Steel Handle Material: Blue Color

€55.20* €69.00* (20% saved)
Ensure 56 bonus points

this item is in stock
delivery before Christmas!

%
Honshu D2 Boshin Toothpick with Sheath
The Honshu D2 Boshin Toothpick Knife is an exceptional addition to the Boshin line of tactical weapons, which blends tradition and innovation and style and function. The 12” blade has a rock-solid, full-tang D2 tool steel construction with a unique flat taper grind and it features weight-reducing thru-holes. The textured, ergonomically contoured TPR handle is secured to the tang with heavy-duty screws and the ridges provide a secure, no-slip grip. The tactical toothpick is 18 3/4” in overall length and it comes housed in a premium, reinforced genuine leather belt sheath, which features a paracord lanyard for lashing. Like all the swords and knives in Honshu's Boshin line, the D2 Boshin Toothpick Knife sets a new standard for both quality and value. Details: Total length: 47.62 cm Blade length: 30 cm Blade material: D2 tool steel

€191.20* €239.00* (20% saved)
Ensure 192 bonus points

this item is in stock
delivery before Christmas!

%
Illuminated Staff of the Wizard Gandalf
A special edition of the Staff of the Wizard Gandalf with an Illuminated crown that glows just like the one seen in The Hobbit: The Desolation of Smaug. Features a translucent lattice within the crown that holds a high intensity white LED (100 lumens, 50,000 hour lifespan). The light is activated by a hidden button in the side of the staff and runs on two replaceable AA batteries housed on the bottom of the shaft (battery lifetime approximately 20 hours). Details: Crafted from the molds of the actual film prop Cast in hard polyresin and hand painted Includes Elven-styled wall display plaque featuring Gandalf’s “G” rune Certificate of Authenticity 73” overall

€295.20* €369.00* (20% saved)
Ensure 296 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Ulfberht Sword
An old legend has it that a Nordic smith named Ulfberht developed the first all steel blade. This crucial development achieved near-mythical status among warriors, making this one of the most important swords in the study of medieval weapons. Several of these blades from slightly different time periods exist, some engraved in gratitude and reference with Ulfberht's hallowed name. Prior to the Ulfberht swords, all European swords were of the pattern welded variety. Soft iron bars were welded together with strips of steel, forged into a blade shape, then a steel edge was welded onto the sword. But, the Ulfberht sword was a quantum leap in both technology and design. Not strips, but good carbon steel blades with enough carbon content to produce excellent swords. Not only was the material better, but the design of the sword was a definite improvement. The blade tapered more sharply to the point than did previous blades. This put the balance of the sword closer to the hand, making a sword that was faster on both the stroke and recovery than previous blades. The engravings on both sides of the blade were photocopied exactly. The blade is made of high carbon steel and is beautifully balanced. The grip is wood wrapped with leather. The stout crossguard is steel, and the pommel is of the brazil nut shape that was quite popular at the time, both with Vikings and the rest of Europe. A beautiful and important sword. A scabbard is included. Details Total length 90,81 cm Blade length 76,84 cm Blade width 5,4 cm Weight 1,3 kg

From €183.20* €229.00* (20% saved)
Ensure 184 bonus points

this item is in stock
delivery before Christmas!

%
Sword scabbard Glamdring white
This authentic and highly detailed scabbard is a reproduction of the scabbard featured in New Line Cinema's Lord of the Rings trilogy. United Cutlery has recreated this scabbard using only the finest materials. The scabbard is 99 cm long and has a leather cover and an antique metal finish.

€207.20* €259.00* (20% saved)
Ensure 208 bonus points

this item is in stock
delivery before Christmas!

%
Champagne Saber, Blue Handle
The tradition of opening champagne bottles with a saber - called sabrage - is said to have been practiced for the first time by Napoleon's troops about 200 years ago. On the celebratory occasions of their many victories, they opened the champagne bottles with their briquet sabers. Even today, champagne bottles are opened in this way on ceremonial occasions and receptions.The blade of the saber is made of stainless steel, the hand guard is made of brass and the grip is made of wood.Around the saber in style to be presented, it is delivered in a beautiful wooden box, as well as instructions with tips and information on how to use the saber. Details: Blade length: 26.5 cm Total length: 42 cm Handle length: 11 cm

€19.95* €39.90* (50% saved)
Ensure 20 bonus points

this item is in stock
delivery before Christmas!

%
Cobra Steel Kopis
This Windlass Cobra Steel sword is based on the ancient Greek Kopis. Like the old sword, it has tremendous chopping power. However the point aligns perfectly with the wrist for a thrust, which makes this a good fighting pattern as well! Weather resistant rubber handle for comfort, positive grip and shock absorption on a full profile tang. The hand-forged, X46Cr13 high grade stainless steel blade has been fully tempered in state-of-the-art computer controlled ovens, making it super tough and weather resistant when battling the great outdoors. Hardened to a Rockwell of 48°, it will “flex” in a cut and come back for more! Factory sharp, includes a riveted leather scabbard. Can be personalized with 3 Initials. Overall Length 22" Blade Length 16" Weight 1lb/4oz Material X46Cr13 Stainless

From €135.20* €169.00* (20% saved)
Ensure 136 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Genuine Gurkha Regimental Kukri
The genuine Gurkha Regimental Kukri is made by the government contractor Windlass Steelcrafts. Each comes with a regulation sheath. Used with devastating effectiveness by the famous Nepalese Gurkhas in the Siege of Delhi in 1857, in the trenches of WWI France, throughout the New Guinea jungle in WWII, and with distinction in the Falkland Islands. The blade features deep grooves and the traditional religious notch. This kukri features a scale tang and the traditional, native hardwood handle. The butt plate is standard and made of metal. The Gurkha regimental kukri comes with accessory knives. Details: Total length: 17" Blade length: 12" Blade thickness: 1/4" Weight: 1 lb. 6 oz.

From €63.20* €79.00* (20% saved)
Ensure 64 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Halo Sword
This sword is the weapon of the Sangheili, and has been their weapon of nobility since its creation during one of their Ages of Discovery. Viewed as a holy weapon the Sangheili pride themselves on their skills with this weapon and believe that it is better for a Sangheili to fall on his sword as an act to redeem his honor or to die by it. Details: Overall length: 91 cm Handle Length: 20 cm Blade material: Stainless Steel

€63.20* €79.00* (20% saved)
Ensure 64 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Spiculus Gladius
Admired for his fighting skills by the throngs of citizens that attended the Gladiatorial Games, the Gladiator Spiculus became personally favored by the Roman Emperor Nero. Spiculus was lavishly rewarded for his exploits in the arena. We've designed this gladius to be true to the period, but worthy of a champion. Details: Total length: 78.74 cm Blade length: 60.96 cm Weight: 0.85kg Blade Material: 1075 High Carbon Steel

From €343.20* €429.00* (20% saved)
Ensure 344 bonus points

this item is in stock
delivery before Christmas!

%
Sword of Fili - Hobbit
This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: AN UNEXPECTED JOURNEY. United® Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. The Sword of Fili is approx. 64.8 cm overall, featuring a massive approx. 0,95 cm thick stainless steel blade, and a hilt of solid metal and hard acrylic. It is presented with a wood wall display and includes a certificate of authenticity. Details: Overall Length: approx. 64.8 cm Blade Thickness: approx. 0.95 cm Blade Material: Stainless steel Handle Material: Wood & metal Display Material: Wood with wood grain finish

€215.20* €269.00* (20% saved)
Ensure 216 bonus points

this item is in stock
delivery before Christmas!

%
Final Fantasy Advent Children 6-pcs Sword
This is the FINAL FANTASY ADVENT CHILDREN 6-PCS Sword. Details: Blade length: 80 cm Handle length: 25 cm Total length: 109 cm Blade height: 13 cm Total height: 17cm Material: steel Weight: 4500 g

€119.20* €149.00* (20% saved)
Ensure 120 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Historic Forge Pioneer Bowie Knife
A new edition to Honshu's Historic Forge line, the bowie knife was a logical choice because of its iconic status in history. The knife has a premium carbon steel bade with a gun-blued finish and it extends from a heavy-duty carbon steel handguard with a blued finish. The rich, brown handle has a classic look with a downward curved pommel and a lanyard hole. A leather belt sheath with a laced frog comes with the bowie, providing different options of carry. Details: 31,43 cm, hollow-ground 1075 carbon steel clip point blade with a gun blued finish and a sharp edge Handle scales are crafted of sturdy heartwood, secured to the tang with hefty screws and there’s a lanyard hole The 45 cm overall bowie knife slides smoothly into a genuine black leather belt sheath with a leather laced frog black thickness 6,35 mm

€159.20* €199.00* (20% saved)
Ensure 160 bonus points

this item is in stock
delivery before Christmas!

%
Gil Hibben Folding Cleaver Knife
The Gil Hibben Folding Cleaver Knife puts the incredible chopping power of a full-size cleaver right in your pocket! No one knows about practical everyday knife use like Gil Hibben. The knife has a 3 7/8” 7Cr17 stainless steel cleaver blade, with a satin finish, which can be easily accessed with its flipper. The handle scales are crafted of black Micarta, secured with sturdy screws, and the liners are bead blasted stainless steel. The pocket knife has a bead-blasted stainless steel pocket clip and is 5”, when closed, and it is 8 7/8” in overall length. Details: Total length: 22.54 cm Blade length: 10 cm Blade material: 7Cr17 stainless steel

€95.20* €119.00* (20% saved)
Ensure 96 bonus points

this item is in stock
delivery before Christmas!

%
Champagne Saber, Brown Handle
The tradition of opening champagne bottles with a saber - called sabrage - is said to have been practiced for the first time by Napoleon's troops about 200 years ago. On the celebratory occasions of their many victories, they opened the champagne bottles with their briquet sabers. Even today, champagne bottles are opened in this way on ceremonial occasions and receptions.The blade of the saber is made of stainless steel, the hand guard is made of brass and the grip is made of wood.Around the saber in style to be presented, it is delivered in a beautiful wooden box, as well as instructions with tips and information on how to use the saber. Details: Blade length: 26.5 cm Total length: 42 cm Handle length: 11 cm

€19.95* €39.90* (50% saved)
Ensure 20 bonus points

this item is in stock
delivery before Christmas!

%
Gil Hibben Pro Throwing Axe Black
"Trigger Grip" handle design guides the hand into the same consistent and accurate release each time it is thrown. Includes genuine leather sheath. Design patented. Specifications: Overall Length: 12" Blade/Handle Material: One-piece, tempered, 420 J2 stainless steel. Blade Thickness: 3/16" Sheath: Black genuine leather.

€47.20* €59.00* (20% saved)
Ensure 48 bonus points

this item is in stock
delivery before Christmas!

%
Royal Seals of the Crusades
We have gotten numerous requests for a set of royal seals. This first series, expertly made by Marto of Spain, is based on ones used during the Third Crusades. Each of these round seals can be screwed into the wooden handle and be interchanged in seconds. Included with this set are four seals, a wooden stamping handle and two waxing candles, one red and one gold. All arrive in a stunning display box suitable for any office. Made in Spain. • Seal diameter: 2.54cm Includes: • The Knight’s Templar Seal of Poverty • The Seal of King Richard I of England • The Maltese Cross of the Knights Hospitaller • The Cross Seal of the Knights Templar

€71.20* €89.00* (20% saved)
Ensure 72 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Blacksword
Forged by the dark elves in ages beyond counting, the sword was held by the wood elves for hundreds of years until it was gifted to a man known by many names, but called the medieval “Blacksword” thereafter. Feared by orcs, dwarfs, men and evil beasts alike, the bearer of the sword carried out many great deeds until his death while slaying a great evil dragon. Own this beautifully weighted and balanced war sword, worthy of legend, for yourself. The parts are black, the grip is wood wrapped in leather for a secure grasp and the fully tempered high carbon steel blade is blued to a fine black luster. Comes with scabbard. Overall: 42" Blade: 32-1⁄2" long; 1-7⁄8" wide; 3⁄16" thick Weight: 3 lbs 1065 High Carbon Steel Blade

From €207.20* €259.00* (20% saved)
Ensure 208 bonus points

this item is in stock
delivery before Christmas!

%
USMC Ceremonial Sword
Every historian and sword collector will appreciate the stunning details found in this officially licensed USMC Ceremonial Sword. Exhibiting an ornate and antique style, this handsome Ceremonial Sword features a 440 stainless steel blade with intricate scrollwork designs and a United States Marines etch. The blade is polished to a mirror finish and completed by a gleaming brass-plated, wire-wrapped handle and brass-plated guard. The heavy cord tassel adds further authenticity to this exceptional collectible sword. Measures 36" overall. A coordinating scabbard houses the blade and completes the design. Officially licensed USMC sword Mirror-polished 440 stainless steel Ornate guard and handle Decorative tassel design Coordinating scabbard included Measures 36" overall

€95.20* €119.00* (20% saved)
Ensure 96 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Black Marauder Rapier and Scabbard
This pretty hand forged sword is made by the master smiths at Windlass Steelcrafts. It includes a lightning quick rapier blade made of 1065 high carbon steel tempered to a tough spring. The entire tang is surrounded by an ornate hilt of blackened steel. The comfortable grip is wood covered in black leather. The rope motif at the parts hearkens back to the times of rigging, marauding ships and adventure. Includes matching scabbard with skull and crossbones motif at the metal foot. Best possible for a captain of scalawags that has only a hint of nobility in him. Start your collection with this amazing sword or complete your swashbuckler outfit in an reasonably priced way that does not compromise on quality. Wood Grip is Covered in Black Leather and is Surrounded by an Ornate Hilt of Blackened Steel SPECIFICATIONS Blackened 1065 high carbon steel Blade: 82 cm Matching Scabbard with Skull and Crossbones Motif Included

From €151.20* €189.00* (20% saved)
Ensure 152 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Raven Claw
This wicked knife's hilt is cast metal and the deadly blade is blackened to a deep black lustre and nicely balanced. Details: Total length: 19 1/2" Blade length: 13 1/4" Blade width: 1 1/2 " Blade thickness: 3/16" Weight: 1 lbs.

From €79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
USMC Desert OPS Sawback Machete with Sheath
A reminder of the core values every Marine stands for runs the length of the USMC Desert OPS Sawback Kukri's blade. The officially licensed kukri embodies the fighting spirit of the Marines with its rock-solid build. It has a 15 3/10” stainless steel blade with an olive drab, matte finish and heavy-duty saw serrations running the length of the spine. Printed, in black, on the blade, are the words “Honor, Courage, Commitment.” The grippy handle has ridged ABS handle scales secured to the full tang with heavy-duty screws and an extended point pommel. The 22” overall sawback kukri can be secured and carried in a tough and durable 600D nylon belt sheath with an adjustable shoulder strap. Details: Durable 600D nylon belt sheath 44 cm stainless steel blade Ridged ABS handle scales Overall Length: 61 cm

€63.20* €79.00* (20% saved)
Ensure 64 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Boshin Hellfire Damascus Wakizashi
A modern legend, the Honshu Boshin Hellfire Damascus Wakizashi fuses proven, time-honored tradition with the best in 21st century innovation. Chic contemporary style and state-of-the-art appointments meld seamlessly with classic form and traditional hand-craftsmanship. Even the Damascus steel - a distinctive hand forged variety with centuries-old roots - is reimagined and reworked for an exciting new look: the boldly hued "Hellfire Damascus Steel." Trading delicate, traditional trappings like ray skin and cord for tough, ultramodern materials like TPR, the Boshin is designed for serious, real-world use. It's remarkably well-balanced and an all-around pleasure to wield, and it boasts savage cutting power that's second to none. The imposing wakizashi blade is rock-solid and impossibly sharp, slicing cleanly through rolled tatami mats, thick bamboo and other tenacious materials – suffering neither crack nor fissure in the process. Details: Blade length: 57 cm Total length: 86 cm Weight: 1.58 kg

€231.20* €289.00* (20% saved)
Ensure 232 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
The Christus Imperat Rapier
A rapier of this identical form and proportions is currently housed in The Royal Armouries (formerly the Tower of London). The flamboyantly formed hilt is both beautiful and functional. Its' forward plates are pierced and show lavish birds among foliage, while the bars of the guard are slender both defending the hand and having an upward loop to catch an opponent’s blade. The heavy pommel allows for a more balanced feel for fighting. The blade is etched on both sides of the ricasso with the Latin phrase CHRISTUS IMPERAT which means “Christ Commands.” Made by Windlass Steelcrafts. This rapier has a 1065 high carbon steel blade. Features heavy pommel and elaborate forward plates and guard. Overall length of 47 inches. Overall Length 47" Blade Length 40-1/2" Blade Width 1" Blade Thickness 3/16" Weight 3lbs Grip Length 3-1/2" Material 1065 High Carbon Steel

From €271.20* €339.00* (20% saved)
Ensure 272 bonus points

this item is in stock
delivery before Christmas!

%
Stand with red velvet for 1 sword
This special sword display can be used for one samurai sword. A tanto may be placed in front of the stand on red velvet. An alternative to a tanto would be a maintenance kit. The stand itself features red velvet as well to protect the sword. Details: Height: 21 cm Depth: 17 cm Width: 42 cm front rack: 20x8 cm wide

€45.50* €65.00* (30% saved)
Ensure 46 bonus points

this item is in stock
delivery before Christmas!

%
Walther BTK Black Tac Knife
The Black Tac is a full-fledged one-hand knife with a liner lock and a flipper to assist in opening. The massive spear-point blade, with a partial serration, is dull black, underlining the Black Tac's bold look. Details: Overall Length: 19.9 cm Blade Length: 8.5 cm Handle Length: 11.4 cm Blade Material: 440 Stainless Steel Weight: 164 g

€12.45* €24.90* (50% saved)
Ensure 13 bonus points

this item is in stock
delivery before Christmas!

%
The Hobbit - Thorin Oakenshield - Regal Sword
This is a reproduction of Thorin's Regal Sword seen in the Hobbit "The Battle of The Five Armies". The sword has a Stainless steel 440 blade with engraving all along it. It also comes with a richly decorated wall bracket. Details: Total length: 93.5 cm Blade length: approx. 71.5 cm Handle length: approx. 12 cm Weight: 1.9kg Blade material: 440 stainless steel Handle material: zinc alloy Wall plate: Height: 29cm Width: 21cm Material: wood

From €79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
New German Officers Sabre
The sabre has an overall length of 100 cm. The silver sheath is made of metal and fitted with a metal ring to attach the sheath to the belt. The guard of the handle bar is decorated with oak leaves. The grip is made of black plastic, the surface is finely beaded and wrapped with three silver-plated wires throughout. The lion's head, the temple and guard are made of brass. The narrow band above the guard features a dot decoration at the top and at the bottom. Between the bands, the words "Unity - Justice - Freedom -" should be read. The blade is forged from stainless steel, hardened and tempered. It is approx. 23 mm wide, 810 mm long and slightly curved. Both sides of the blade are finely etched (pattern-welded ) with ornaments and two crossed swords in the middle of the ornament. The eyes of the lion head lights in red color. From the open mouth of the lion arises the narrow temple with the oak ornaments. On the blade between the ornaments are free spaces for names engravings as an expression of the binominal idea or for a motto. These individual engravings are to achieve from the buyer of the sabre on his own initiative (for example, from a goldsmith or engraver of his trust). The pictured sabre is the Army version of the Officer's sabre. The design for this version of the Officer's Sabre - as shown - is closed and a final. The imaged sword knot is within the scope of supply.

From €311.20* €389.00* (20% saved)
Ensure 312 bonus points

this item is in stock
delivery before Christmas!

%
Shikoto Tigerwood Katana with Sheath
The Tiger Wood Katana from Shikoto is a masterpiece of earthy and natural simplicity with its rich tigerwood handle and scabbard. Details: • Clay-tempered, full-tang, T10 carbon steel blade • Features a brass habaki with deep etched kanji • Iron tsuba has gold gilded swords • Tigerwood scabbard with brown cotton cord-wrapping • Tigerwood handle scales • Overall Length: 104 cm

€599.20* €749.00* (20% saved)
Ensure 600 bonus points

this item is in stock
delivery before Christmas!

%
The Lord of the Rings - Sword of Theodred - numbered Edition, Officially Licensed Collectible
The sword of Théodred, fallen son of King Théoden. Théodred ‘s sword was the mate to the sword of Éowyn, his cousin. It was virtually identical, except for its green enameling on the hilt and green leather grip. This authentically detailed sword replica is a reproduction of the actual filming prop sword crafted by Weta Workshop of New Zealand and used in The “Lord Of The Rings: The Two Towers” film presented by New Line Cinema. This meticulously detailed sword, with an overall length of 36 1/2”, features a solid metal guard and pommel with an antique brass plated finish and a tough TPU grip. The 30 1/8” false-edged blade is crafted of tempered stainless steel with a wide filler groove. Each sword is individually serial numbered and presented with a wood wall display and certificate of authenticity. Details: Total length: 92.71 cm Blade length: 30 inches Blade material: stainless steel

€311.20* €389.00* (20% saved)
Ensure 312 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Texas Bowie
Effective, intimidating and built to work. Lightweight, even for its imposing size, this was the knife to carry in a rough land like Texas during the days of Santa Ana when a man truly needed a backup weapon. This knife features an authentic bone handle and fittings of solid steel. Details: Total length: 19 1/4" Blade length: 13 3/4" Weight: 1 lb. 10 oz.

From €79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
Seax
Circa 750 The seax, or sax, was universal in Northern Europe. Carried and used by the Saxons, Angles, Vikings and German tribes, its use probably dates before the fall of Rome and continues on into the early Middle Ages. From small knives with 3-4 inch blades to actual swords with blades of 27-28 inches, always single-edged, the profile of the seax varied a great deal. The original version of this large knife served from camp work to cutting work, on shipboard, and for fighting if a sword or axe was not available. The lobed pommel and guard are brass, and the wood grip is studded with brass tacks, for a very secure and comfortable grip. The blade is etched on both sides, flat ground, and capable of taking and holding a razor sharp edge. The leather sheath has been riveted and laced like the originals and features two thong slots. Details: Total length: 19" Blade length: 13" Blade width: 1 5/8" Blade thickness: 1/8" Weight: 1 lbs.

From €111.20* €139.00* (20% saved)
Ensure 112 bonus points

this item is in stock
delivery before Christmas!

%
Handmade Odachi Sword
More than just an ordinary Samurai Sword! This piece stretches an alarming 175 cm and is equipped with a 124.5 cm long 1050 steel heat tempered blade. The blade is sharp and fully functional.The cord wrapped handle is also extra long for two-hand action.Includes wooden sheath with cord wrap. Special Features: * Huge, hand forged 1050 steel blade * Full length Hi * Rectangular tsuba with stone finish * Cotton and rayskin imitation wrapped tsuka (double pegged) * Wood saya with black speckled finish * Fully Functional Details: Total length: 173cm Length of blade: 121cm Length handle: 44cm Weight: 1.68kg Wide blade (at Tsuba): 3,1cm Thick blade (at Tsuba): 1.3cm Thick blade (before Habaki): 0.9cm Focus: 28cm (from Habaki) Blade Material: 1050 steel Handle Material: Cord wrapped wood

€103.20* €129.00* (20% saved)
Ensure 104 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Suontaka Viking Sword
Circa Mid 10th Century The original Suontaka sword was found in a woman's grave in Finland. The grave dates from C 1100AD, however the sword form suggests a much earlier date of origin, possibly as early as mid 10th Century AD. Our stunning version of this piece features a highly detailed knot work pommel, guard, grip band and inserts. All have been lavishly plated in rich copper. The tough 1065 high carbon steel blade has a full tang and is fully tempered, then peened over the pommel. The sword comes complete with a rich leather scabbard and matching copper fittings and sports a baldric for wearing this powerful piece. • Overall: 37" • Blade: 30-3/4" Length, 1-3/4" Width, 3/16" Thickness • Weight: 3 lb 1 oz • Material: 1065 High Carbon Steel

From €263.20* €329.00* (20% saved)
Ensure 264 bonus points

this item is in stock
delivery before Christmas!

%
United Defense Bo-Staff
It’s important for you or your martial arts students to have a good, quality training bo staff to hone their fighting skills with. Our Night Watchman Bo Staff is constructed of high impact-resistant polypropylene that will take a beating for years without wearing down. Because of its perfect weight and balance, it is perfect for the intense training required to master the art of staff fighting! Total Length: 183 cm

€63.20* €79.00* (20% saved)
Ensure 64 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Poignard
CIRCA 1390. A forerunner of many long parrying daggers of later years, its long reach made it very effective. It saw much use in its own day as a backup weapon on the battlefield and was carried at court when swords were forbidden, for they made formidable weapons in the hands of an expert. A scabbard is included. Details: Total length: 20 1/2" Blade size: 14 3/4" long, 1 3/8" wide, 3/16"" thick Weight: 1 lbs. 4 oz.

From €79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Conan The Fathers Sword
Hand-forged from 1085 high carbon steel and tempered to 52 HRC for strength, this sword has been expertly reproduced by the master craftsmen at Windlass Steelcrafts®, as an exact replica of the sword used on screen. From the intricate details on the guard and pommel to the deep runes on the powerful blade, this is truly a masterful reproduction. Comes with a Certificate of Authenticity. Can be sharpened for an additional fee. Details: Overall Length: approx. 95.5 cm Blade Length: approx. 72,3 cm Blade Material: 1085 High carbon steel Weight: approx. 2,06 kg The matching scabbard for the father sword can be found in our shop under the number 88335.

From €343.20* €429.00* (20% saved)
Ensure 344 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Buffy - Jackal Knife
This knife was a knife given by Richard Wilkins to Faith Lehane. She used it to cut off the hand of the dead courier that held the Box of Gavrok but later lost it when killing one of the spiders from the box. Buffy Summers used the knife to stab the rogue Slayer during their fight in the latter's apartment and also to lure the Mayor, who had Ascended into the embodimient of the demon Olvikan, into a trap within the high school's library. Details: Total length: 39.5 cm Blade length: 21.5 cm Handle length: approx. 18 cm Weight: 0.45kg

€39.20* €49.00* (20% saved)
Ensure 40 bonus points

this item is in stock
delivery before Christmas!

%
Fantasy short sword with scabbard
Fantasy is a genre of speculative fiction that roots in the mythology. Like similar genres f.e. science fiction and horror, the fantasy has its main characteristics in literature and movies but also in music and visual arts, parlor and video games. This fantasy sword is 66 cm long and has a black 46 cm long blade made of stainless steel. Including 600D nylon sheath. Details: Overall length: 66 cm Blade length: 46 cm Blade thickness: 3 mm Handle: with cord wrapped Including 600D nylon sheath

€39.20* €49.00* (20% saved)
Ensure 40 bonus points

this item is in stock
delivery before Christmas!

%
VG-10 Honshu Tanto Knife with Leather Sheath
An everyday carry, this massive United Cutlery VG-10 Honshu Tanto Knife is NOT, but it's a great blade for self-defense or even hog hunting. The 10 3/4" massive, thick, full tang incredible VG-10 steel blade is razor sharp, and a deep blood groove spans the entire length. The overmolded, no-slip TPR grip gives you supreme control, and the oversized stainless steel hand guard prevents your hand from slipping to the blade. The hefty stainless steel pommel features a lanyard hole. A black leather sheath is included and the fixed blade knife is 16 3/4" in overall length. Details: Total length: 42.5 cm Blade length: 27 cm Blade material: VG-10 steel

€159.20* €199.00* (20% saved)
Ensure 160 bonus points

this item is in stock
delivery before Christmas!

%
Overlord Long Leather Belt
Made of high-grade black leather, this 66-1/2" long belt has an elaborate silver buckle and tongue with twelve Celtic knot work crosses along the length. It is perfect for a wide range of periods from Viking through the high Middle Ages.

€55.20* €69.00* (20% saved)
Ensure 56 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Historic Forge German Long Sword
The Honshu Historic Forge German Long Sword is a remarkable weapon that brings the spirit of medieval Germany to life. Crafted with meticulous attention to detail, this sword features an authentic German Long Sword design, making it a must-have for historical enthusiasts and collectors. With a 35 3/8" Carbon Steel Blade, this sword is built to withstand the test of time. The blade's exceptional strength and durability are enhanced by the Rockwell Hardness HRC 47-52 rating, ensuring its reliability in combat or display. The 5 1/2" forward point of balance from the hilt allows for effortless maneuverability and precise strikes. The black leather wrapped handle provides a secure and comfortable grip, allowing for precise control and handling. The circular pommel and oversized crossguard with cutouts not only enhance the sword's aesthetic appeal but also offer added style and protection during combat. To ensure the sword's longevity and easy transport, it comes with a black leather sheath. This sheath not only protects the blade but also adds to the overall presentation and convenience of the sword. Whether you are a collector or a historical enthusiast, the Honshu Historic Forge German Long Sword is a must-have addition to your collection. This versatile sword can be used for historical reenactments, stage performances, or as a statement piece for display. Its exceptional craftsmanship, authentic design, and superior quality make it a valuable addition to any sword collection. Unleash your inner warrior and experience the power and grace of the Honshu Historic Forge German Long Sword. Details: Blade Length: 35 3/8" Blade Material: 1065 High Carbon Steel Weight: 3.35lbs

€319.20* €399.00* (20% saved)
Ensure 320 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Musketeer Rapier
CIRCA 1590. The musket, though the prime weapon of the French Musketeer, was a cumbersome firearm, both to load and fire, so a good rapier was a necessary second weapon. The basket of this rapier's hilt is ambidextrous and a very effective mix of both the cup-hilt and swept-hilt style. The grip is wood wrapped with twisted wire and the parts of the hilt are plated with gleaming nickel silver. Details: Total length: 46" Blade size: 37 1/2" long, 1" wide. Weight: 2 lbs. 8 oz.

From €239.20* €299.00* (20% saved)
Ensure 240 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Highlander Katana - Connor MacLeod
This katana comes from the famous Highlander movies. The main character Connor MacLeod gets this from the Spaniard Ramirez, who is also his teacher.Equipped with the characteristic and filigree dragon handle, the golden tsuba, which also represents a dragon, and the golden fittings, this makes itself Sword perfect in any fans of the movies collection. Details: - Blade material: stainless steel - Handle Material: Imitation Ivory (Resin) - Total length: approx. 104 cm - Blade length: approx. 70 cm - Weight: about 1.5kg

From €159.20* €199.00* (20% saved)
Ensure 160 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Sleepy Hollow - Hessian Horseman Sword
This massive, two-handed sword was used by the evil Hessian in the classic motion picture Sleepy Hollow. This sinister and powerful sword has the snake's head pommel with faux ruby jeweled eyes and serpent scale grip, giving this blade a truly venomous design. A tempered, high carbon steel blade provides the bite to this sword, allowing it to back up its fierce appearance. Made by the experts at Windlass Steelcraft. Can be sharpened for an additional fee. A scabbard not included. Details: Overall Length: approx. 113 cm Blade Length: approx. 81.3 cm Blade Width: approx. 5 cm Blade Thickness: approx. 0.47 cm Blade Material: High Carbon Steel Weight: approx. 2043 g

From €175.20* €219.00* (20% saved)
Ensure 176 bonus points

this item is in stock
delivery before Christmas!

%
Daimyo FF Katana 73.66 cm Gold Eagle
An heirloom grade classic Samurai Katana (without Bo-Hi to increase cutting power) forged from folded 1095/1080/1060 carbon steel. The blade is differentially clay-tempered to harden the edge will retaining a softer spine to increase resistance to shock. This blade is given our Daimyo hand-polish, taking over 40 hours on Japanese natural stones to provide a mirror finish that provides insight into the Hada and a distinct Hadori Hamon. Matched with an intricately detailed Gold Eagle tsuba (based on an antique in the Boston Museum of Fine Arts collection) and blue Japanese silk Ito. this sword is authentically Japanese while having an American character. The centerpiece of any collection, this sword represents our smiths' best work with modern steel. Details: Blade length (in/cm): 29/73.66 Overall length (in/cm): 40.75/103.51 Weight (lbs/kg): 2.4/1.09 Steel: Forge Folded Tri-Steel Polish: Hand Temper: Differential Clay-tempered Bo-hi: No Tsuba: Gold Eagle Fuchi-Kashira: Gold Eagle Ito: Blue silk Saya: Black gloss

€999.00* €2,199.00* (54.57% saved)
Ensure 999 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Sticklestad Viking Sword
The Battle of Stiklestad was the final battle of St. Olaf. This was warfare of the old school, with two hosts meeting face-to-face and sword-to-sword. It was a brutal, bloody and deadly fight, and in the end, the mighty Olaf fell. Gaining a lot of fame for his exploits, he was eventually canonized as St. Olaf. This attractive Viking sword is copied from a specimen that was quite involved in that kind of vicious encounter. Made from high carbon steel the sword is a beautifully balanced and highly effective weapon. Capable of both cutting and thrusting, it is also a delight to the eye. Pommel and guard are tastefully decorated with copper, the wooden grip is covered in leather. A scabbard is included. Details: Total length: 37" Blade length: 31" Blade width: 2" Blade thickness: 3/16" Weight: 2 lbs. 12 oz.

From €215.20* €269.00* (20% saved)
Ensure 216 bonus points

this item is in stock
delivery before Christmas!

%
Western Outlaw Bowie Knife With Leather Sheath
This Timber Rattler Outlaw Bowie Knife is one powerful full tang beast of a blade that every manly man needs. The full tang 11 3/8" stainless steel blade will hack through anything life throws at you. Whether you're chopping trees or slicing through thick ropes, you'll get the job done fast with the Outlaw. Each knife includes a handmade genuine leather belt sheath. Your friends will think you paid at least $100 for this classic piece of steel, so get yours today before they're all gone! Details: Blade length: 28.89 cm Total length: 41.91 cm Classic gray hardwood handle Including real leather sheath

€55.92* €69.90* (20% saved)
Ensure 56 bonus points

this item is in stock
delivery before Christmas!

%
Scottish Cutlass
The crashing of waves, the roar of cannons, the shout of sea rogues through the foreboding mist - this new cutlass can't help but unleash adventurous images. Scottish born Capt. (William) Kidd, we're sure, would have favored this sword. As seen in period art, the Scottish Basket-Hilt was at times married to a cutlass blade (this one has a double edge for the first 9" of the blade). The basket itself provided excellent hand protection and could deliver a hard blow in close combat aboard. A scabbard is included. Details: Total length: 31 1/2" Blade size: 25" long, 2 1/8" wide, 3/16"" thick Weight: 3 lbs. 4 oz.

From €191.20* €239.00* (20% saved)
Ensure 192 bonus points

this item is in stock
delivery before Christmas!

%
The Lord Of The Rings - Helm Of King Theoden - Officially Licensed Collectible
Théoden was the noble and courageous King of Rohan and Lord of the Riddermark. He led his people to victory against the Uruk-hai in the Battle of Helm’s Deep, despite overwhelming odds. He then rallied his forces in the defense of Gondor, to protect the white city of Minas Tirith and the hope of all Middle-earth. He bravely fought against the forces of Mordor on the Pelennor Fields, where he made his last stand. Théoden’s armor and weapons were the finest in Rohan. His steel helm was ornately engraved and enameled, featuring a horse head crest. The surface was highly decorated with sun and horse motifs of bronze and copper. The leather neck guard was embossed with Rohirric designs. This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop and used in “The Lord Of The Rings” films presented by New Line Cinema. The helm is crafted of reinforced polyresin and genuine leather, with precisely-molded details and coloring. It is presented with a polystone and wood display, sculpted in the shape of Théoden’s neck and shoulder armor. It includes a certificate of authenticity, and each piece is individually serial numbered on a metal shield.

€543.20* €679.00* (20% saved)
Ensure 544 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Agincourt War Sword - Battlecry Collection
Filling an under served niche in available swords today, the Agincourt hand-and-half sword from Windlass Steelcrafts Battlecry collection is a slender, light, quick weapon well-suited to facing armored or unarmored adversaries. This is an agile weapon whose length and weight make it highly effective on its own in either one or two-handed fighting. But it’s equally dangerous when paired with a buckler or even a larger shield. Combining versatility with utility, the dexterity and lightness of the Agincourt betrays a dangerous fighting blade of respected martial utility. With a 1065 high carbon steel blued patina, it’s well protected from the frequent rust spots and stains that occur so often from everyday practice and exposure to the elements. The battle-hardened finish had an extra wide tang and is tempering to a low 50's RC. This pre-sharpened blade has gone through rigorous testing. The hands-on nature of the manufacturing by master smiths makes this line unique. Includes a matching scabbard with belt stop, custom packaging and certificate of authenticity signed by each smith that touched your blade through every step of the forging process. One could easily envision English long-bowmen and knights alike wielding this blackened blade on the fields of the famous and disastrous battle honored in the naming of this sword. The term hand-and-a-half is more of modern designation for a range of sword types that featured tapered blades longer than the common shorter arming swords of the time but without the double-hand grips of larger heavier war-swords. Many different swords fall into this category and many of them are as maneuverable as they are surprisingly sturdy. In full armor a heavy sword is no advantage and a narrow point on a slimmer blade is ideal for getting into the vulnerable spots on another armored combatant. At the same time, the advantage of having a faster weapon with a extended grip that could still be adroitly handled with both hands, provided knights and men-at-arms alike with a resourceful option. A sword like this also deftly employs the blade-gripping techniques called half-swording that make up such a large part of the authentic fighting methods. Details: Overall Length: 39" Blade Length: 30-5/8" Blade Width: 1-5/8" Blade Thickness: Weight: 2 lbs / 8 oz Grip Length: Point of Balance: 3-1/2" Below Hilt Steel: 1065 High Carbon Edge: Sharpened

From €239.20* €299.00* (20% saved)
Ensure 240 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Commando Sword
The ninjato is the weapon of the dark Ninja. It has a blade length between 45-61 cm with a straight sharp blade. Sometimes the Ninja just shortened a katana to produce a ninjato. This ninjato is the Commando version of a normal Ninja sword. The blade is black and extremely sharp. Total length: 69 cm

€47.20* €59.00* (20% saved)
Ensure 48 bonus points

this item is in stock
delivery before Christmas!

%
Zoom Mini - Tanto, Satin
The Zoom series is a lightweight, compact folder that is quick to open and durable. Utilizing SOG's patented assisted opening technology, the blade opens quickly with a simple push of your thumb on the thumb stud. The anodized aluminum handle and stainless steel liners make the knife balanced and strong. The handle shape contours to your hand making it comfortable to hold and grip. Its thin profile and a reversible pocket clip make it a perfect choice for an everyday carry. Details: Overall Length 7.2" Closed Length 4.15" Product Weight 3.50 oz Blade Length 3.15" Blade Thickness 0.1" Product Type Folding Knife Locking Mechanism Button Lock Belt Clip Type Reversible Low-Carry Engravable Yes Finish Satin Polished Edge Type Straight Blade Steel Type AUS-8 Blade Shape Tanto Handle Material Hard-Anodized 6061 T6 Aluminum Handle Color Black, Silver Hardness Rc. 56-58

€69.30* €99.00* (30% saved)
Ensure 70 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Viking Throwing Axe
This Viking inspired axe has an engraved knot work dragon on the darkened solid steel head. Stained hardwood shaft, perfect for throwing.Vikings were renowned for their axe throwing. This piece, manufactured by Windlass Steelcrafts, is beautifully balanced for throwing and has an engraved knot work dragon cut into the darkened solid steel head plus a stained hardwood shaft. Overall Length: 19-1/2" Head Length: 6-1/4" Blade Edge: 3" Shaft: 19" Weight: 2 lbs Material: 1065 High Carbon Steel

From €47.20* €59.00* (20% saved)
Ensure 48 bonus points

this item is in stock
delivery before Christmas!

%
Adjustable Medieval Sword Belt, Size S/M
This extra long period belt is made of thick top grain black leather. The fully adjustable built-in frog allows a wide variety of LARP weapons to be carried. This functionality also allows many of our Windlass sword scabbards to be fit, as well! Also available as a Double Sword Belt (#70533). Available sizes S/M or L/XL. details 3mm thick leather 5cm wide length S/M 150 cm length L/XL 165 cm

€71.20* €89.00* (20% saved)
Ensure 72 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Faithkeeper – Sword of The Knights Templar
The main driving force behind the Order of the Knights Templar was faith. Faith in God, faith in their mission and faith in each other. This sword is a testament to these valiant knights. The finest metalsmiths at Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability. Holding this piece in your hand will leave no doubt that this magnificent sword could have defended the Holy Land.The genuine hand-wrapped leather grip and the hand finished solid steel parts show just how tough and beautiful this sword truly is.The pommel features an inset coin, a tribute to Bohemond II, Crusader Prince of Antioch, while the cross guard is inscribed on both sides with the Latin phrase Christus Vincit ~Christus Regnat - Christ Conquers ~ Christ Reigns.The high-carbon steel blade has a deep fuller on both sides and has a pieced cross of the Knights Templar at its ricasso.The sword includes a custom, matching top grain leather scabbard and period belt, which has been decorated with both the seal and cross of the Templar order. This sword is truly a must-have for any aficionado of Knights Templar history. Overall Length: 41" Blade Length: 33" Blade Width: 2" Blade Thickness: 3/16" Weight: 3 lbs / 7 oz Material: High Carbon Steel

From €311.20* €389.00* (20% saved)
Ensure 312 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Kingston Arms by Hanweis
Tourney Hand-and-a-Half Knightly Sword - Blunt by Kingston Arms
A close recreation of the famous Oakeshott Type XVIIIa.4 sword from Records of the Medieval Sword with some liberties taken to make it safe for reenactment and stage use. This sword proves to be a powerful sight on the field of battle and is a perfect accompinament for a 14th to mid 15th Century man of war. Our Tourney Series Medieval Sparring Swords from Kingston Arms will set a new standard in this price point of re-enactment weaponry. Features like thru-tang handle construction, peened thru-tang stainless steel pommel and guard, 2mm rounded edge thickness make these brutal weapons on the battle field. The cord wrapped leather grip feels exceptional in the hand with an oval cross section and slight barrel shape to keep fatigue at bay. The grip is large enough to accomodate armoured hands. A respectable fuller runs the length of the blade to lighten and counter balance the sword overall. A wood core and leather wrapped scabbard tipped with a stainless chape comes with each sword. Further Tourney Series models are the Viking Sword and Single-hand Swords. The blade is forged from 9260 high carbon spring steel and is tempered to about 50 Hrc, providing a long lasting sword. The guard needs special mention, featuring the King-Peen system. King-Peen is essentially a steel tab on the guard under the grip that is pinned through the tang of the sword. This process keeps the guard from going loose after a lengthy campaign without compromising the strength of the hilt. The pommel is pressed into place and hot peened. Combine these two processes and you get a sword that rings like a bell when struck. Key Features: Durable Hand Forged 9260 Spring Steel Blade Stainless Hilt and Wood-Core Leather Wrapped Grip Wood Core Scabbard Included Specifications Overall: 41 1/4" Blade Length: 32 3/4" Handle Length: 6" Weight: 3lb 7oz Point of Balance: 4" Point of Harmonics: 21 1/2" Blade Steel: 9260 Specs will vary slightly from piece to piece.

€255.20* €319.00* (20% saved)
Ensure 256 bonus points

this item is in stock
delivery before Christmas!

%
Game of Thrones - Heartsbane Sword
Heartsbane is House Tarly's Valyrian steel sword. The Tarlys have held the blade for around 500 years and it is usually proudly displayed on a mantle in an antler sword stand at their headquarters in Horn Hill. Details: Blade material: steel Handle material: wood Total length: 105 cm Blade length: 80cm Handle length (wood only): approx. 11 cm Queen guard: 26 cm Weight: 2 kg Wooden Plaque is included.

From €103.20* €129.00* (20% saved)
Ensure 104 bonus points

this item is in stock
delivery before Christmas!

%
Daimyo FF Katana Hi 73.66 cm Gold Eagle
An heirloom grade classic Samurai Katana (with Bo-Hi to decrease weight and improve handling) forged from folded 1095/1080/1060 carbon steel. The blade is differentially clay-tempered to harden the edge will retaining a softer spine to increase resistance to shock. This blade is given our Daimyo hand-polish, taking over 40 hours on Japanese natural stones to provide a mirror finish that provides insight into the Hada and a distinct Hadori Hamon. Matched with an intricately detailed Gold Eagle tsuba (based on an antique in the Boston Museum of Fine Arts collection) and blue Japanese silk Ito. this sword is authentically Japanese while having an American character. The centerpiece of any collection, this sword represents our smiths' best work with modern steel. Details: Blade length (in/cm): 29/73.66 Overall length (in/cm): 40.75/103.51 Weight (lbs/kg): 2.25/1.02 Steel: Forge Folded Tri-Steel Polish: Hand Temper: Differential Clay-tempered Bo-hi: Yes Tsuba: Gold Eagle Fuchi-Kashira: Gold Eagle Ito: Blue Silk Saya: Black gloss

€999.00* €2,199.00* (54.57% saved)
Ensure 999 bonus points

this item is in stock
delivery before Christmas!

%
Broad Sword
This broad sword has a pommel and guard made of steel. The long handle and the excellent balance make this sword very fast and dangerous. The forged high carbon blade features a hardness of 48-52 HRC, has no sharp edges and is fully battle ready. Details: Weight: 1.52 kg Blade length: 70.5 cm Handle length: 12.5 cm Total length: 90 cm Category 3: These swords are top-quality battle ready swords. They are likewise suitable for beginners and advanced fighters looking for a sword with a good price-performance ratio and great durability. All category 3 swords feature high-quality carbon steel blades which are tough and flexible at the same time. When used against other blades they show hardly any scratches. The pommels are riveted at the end of the wide tangs.

€183.20* €229.00* (20% saved)
Ensure 184 bonus points

this item is in stock
delivery before Christmas!

%
A.P.O.C. Survival Katana
Before the seven seals are torn away... CAS proudly introduces the A.P.O.C. Swords from Dragon King. Whether it be plague, natural disaster, mass hysteria, nuclear fallout, zombies, alien invasion or mankind’s inevitable A.I. war, these tactical swords feature a meek and functional design against unremitting maintenance and corrosion in those bleak future days. But such thought in design are expected from combining the expertise of the artisans of Dragon King and the mind of sword maker, Gus Trim. Tactically black and no frills, the removable durable black G10 handle scales cover a thick full-tang on the Black Oxide coated 9260 Spring Steel blades. The black textured fiberglass sheaths are fitted to a Molle compatible kydex platform that allows you to secure your swords to belt or pack in multiple carry positions. A hole in the end of the scabbard allows drainage in wet environs. A notch in the handle and the platform allows for stealth unsheathing as well as locking the sword securely for inverted maneuvers. No preparations for the end times are complete without an A.P.O.C. tactical sword for when the bullets run out, the knives are too short and your life is on the line. The A.P.O.C. Katana at a glance looks atypical except for the classic Japanese styled blade. But fans of Gus Trim will recognize his subtle style and perfection in a design that’s historically atypical for this famed sword maker. When he was still making this sword, Gus called this model the "Little Tigress" and it's easy to see why. The 11 3/8” full tang G10 handle glides gently in the hand as the handle slabs, rivets and blade profile are effortlessly flush all around preventing blisters or lesions which eliminates a big problem when combatting in an infectious environment. The hooked guard prevents your fingers from sliding onto the blade edge. The 23 1/2" blade edge and contour features another Atrim profiling feature allowing precise cuts and slices. At 36 5/8” overall and 2 lbs 6 oz the A.P.O.C. Katana is hefty enough to split skulls and sever limbs but light enough to not hinder a valiant retreat. Specifications Overall: 36 5/8" Blade Length: 23 1/2" Handle Length: 11 3/8" Weight: 2 lbs 6 oz Point of Balance: 2" Blade Steel: 9260 Thickness of blade: 4mm Handle Material: G10

€183.20* €229.00* (20% saved)
Ensure 184 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Historic Single-Hand Sword And Scabbard
Part of the Honshu Historic Series, this Single-Hand Sword was crafted using a time-tested sword design with modern engineering, giving you perfect blade-to-hilt balancing. It has a sharp 30 4/5”, 1065 high carbon steel blade with a brushed finish, which extends from a polished steel handguard. The wooden handle is wrapped in brown leather and the hefty pommel is polished steel. The 40” overall sword slides smoothly into a brown leather scabbard with metal accents. Honshu continues to expand its exceptional sword line and this sleek, tactical broadsword is a must-have for your collection! Details: Total length: 78 cm Blade length: 102 cm Blade material: 1065 carbon steel

€263.20* €329.00* (20% saved)
Ensure 264 bonus points

this item is in stock
delivery before Christmas!

%
Denix
Viking Battle Ax, 8th century
Viking battle axe with silver axe blade, based on original pieces from Scandinavia, 8th century The axe blade is made of a zinc aluminum casting and richly decorated. The handle is made of wood. Dimensions: Total length: 34,3’’

€76.00* €95.00* (20% saved)
Ensure 76 bonus points

this item is in stock
delivery before Christmas!

%
Kingston Arms by Hanweis
Renaissance Side Sword
The Side Sword was a military sword of the 16th and 17th century Renaissance period that also achieved popularity among civilians, due to its relatively light weight and quickness. It also had an advantage over its contemporary, the rapier, in having the ability to cut efficiently as well as thrust. Based on an original German sword of this type, this sword is well balanced an feels exceptional in the hand. The “swept” hilt affords excellent hand protection and the blade geometry makes for outstanding performance in both the cut and the thrust. Key Features: • Forged High Carbon Steel Blade • Based on an Original German Side Sword • Leather Covered Scabbard Included Specifications Overall: 41" Blade Length: 33" Handle Length: 5 1/2" Weight: 2lb 11oz Point of Balance: 3 1/2" Thickness at Guard: 5.5mm Thickness at Tip: 2.5mm Blade Steel: 5160 Handle Material: Leather Specs will vary slightly from piece to piece.

€335.20* €419.00* (20% saved)
Ensure 336 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Sword of Robert the Bruce
Robert the Bruce, King of Scots, was one of the most famous warriors of his generation, and he eventually led Scotland during the first of the Wars of Scottish Independence alongside William Wallace. He fought successfully during his reign to regain Scotlands place as an independent nation, and he is today remembered in Scotland as a national hero. This heroic sword is as powerful as the man who would have wielded it. The Robert the Bruce Sword is hand forged from high carbon steel. The beautiful pommel emblazons the Cross of St. Andrew, while the hearty grip is wrapped in soft, black leather, held in place by a corded silver chain. The massive Scottish sword comes complete with a matching, thick black leather scabbard and sports a silver Lion of Scotland at its throat and a rounded silver metal shoe at its tip. A belt is attached. Key Features: Inspired by the King of Scots Grip is wrapped in black leather and silver chain Pommel displays Cross of St. Andrew Comes with a black leather scabbard and attached belt Lion of Scotland decorates scabbard A great functional sword - battle ready Materials: Blade is hand forged from high carbon steel Scabbard and grip are wrapped in leather Attached belt is made of leather Details: Overall Length: 111 cm Blade: 91,6 cm Blade: High Carbon Steel Weight: 1635 g Thickness: 4 mm - 3.7 mm Width: 50.7 mm

From €359.20* €449.00* (20% saved)
Ensure 360 bonus points

this item is in stock
delivery before Christmas!

%
USMC Desert Ops Gladius Sword with Sheath
The officially licensed USMC Desert Ops Gladius Sword embodies the fighting spirit of the Marines. This sword has a 17 3/10” stainless steel blade with an desert tan, matte finish and sinster saw serrations just above the handguard. Laser etched on the blade, are the words “Honor, Courage, Commitment.” The grippy handle has ridged ABS handle scales secured to the full tang with heavy-duty screws and an extended point pommel. The 24” overall gladius sword can be secured and carried in a tough and durable 600D nylon belt sheath with an adjustable shoulder strap. Details: Total length: 61 cm Blade length: 44 cm Blade material: stainless steel

€79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
A.P.O.C. Wasteland Gladius
Like the Roman soldiers of ancient times exploring the unknown reaches you may find yourself at the end of time on expedition to an abysmal, undiscovered country. Like them the only means of survival may be your wits and the blade in your hand. In homage of those brave centurions (past and future) CAS gives you the A.P.O.C. Wasteland Gladius in the continuation of our A.P.O.C. Series of weapons. Containing all the expected features of the swords in the series, our Wasteland Gladius design arises from the larger gladius designs featuring a pronounced “wasp-waist” or “leaf blade” curvature. Along the 21 3/8” blade edge it gives you different angles for different tasks needed on the desolate wastes. The blade flares out from 1 3/8” to 2” creating a brutal chopping cutter and a powerful piercing point or whichever you need. The pommel of the handle doubles as skull cracker, glass breaker for whatever needs bashing or breaking. The 9 ½” handle allows for easy single-hand or two-hand sword use making the Wasteland Gladius probably the most versatile swords in the series. The black textured fiberglass sheaths are fitted to a Molle compatible kydex platform that allows you to secure your swords to belt or pack in multiple carry positions. For belt or sling carry setups the platform has four slots 1 3/8" long and 1/8" wide. A notch in the handle and the platform allows for stealth unsheathing as well as locking the sword securely for inverted maneuvers. No preparations for the end times are complete without an A.P.O.C. tactical sword for when the bullets run out, the knives are too short and your life is on the line. Key Features: 21 3/8" black oxide coated 9260 spring steel blade Full tang, triple riveted G10 handle Light fiberglass scabbard with Molle compatible platform Specifications: Overall: 33" Blade Length: 21 3/8" Handle Length: 9" Weight: 2 lbs 8 oz Point of Balance: 3" Thickness at Guard: 5.9mm Blade Steel: 9260 Handle Material: G10 Specs will vary slightly from piece to piece.

€191.20* €239.00* (20% saved)
Ensure 192 bonus points

this item is in stock
delivery before Christmas!

%
Shrapnel OG Testudo
The Shrapnel OG is the version without the upper hilt. A truly versatile "back up" with striking combat qualities. The leaf blade is characterised by a wide flat grinding, with a narrow whetting angle that makes it particularly sharp. The automatic hard sheath has a tek-lok which means it can be positioned either vertically or horizontally. The only security on the sheath is automatic with a pressure point for removal and insertion, this makes it a knife for intuitive and extremely rapid use, ideal in an emergency. For any type of emergency. Details: Weight: 200 g Blade Length: 11cm Overall Length: 21 cm Blade Thickness: 6,3 mm Blade Steel: N690 (58HRC) Handle Material: Forprene Serration: No Finishing: Testudo

€199.20* €249.00* (20% saved)
Ensure 200 bonus points

this item is in stock
delivery before Christmas!

%
Walking Axe of Gimli
Gimili's Walking Axe is the walking axe that was used by Gimli and his father, Gloin. Next to his Battle Axe the weapon Gimli uses most is his Walking Axe, he uses singly against the Warg Riders that ambush the Rohirrim villagers. It is a long handle with a single axe blade at the top, the straight metal shaft on the blade lets Gimli grasp it and use it as a walking staff. This axe was also carried by Gimli's father, Glóin, during the Quest of the Lonely Mountain. Details: Material: Steel Length: 116.84 cm

€79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
AM-4
Timeless Al Mar Knives designs meet Kershaw’s precision manufacturing and meticulous fit and finish to bring you updated versions of some of the most iconic Al Mar Knives.The AM-4 features SpeedSafe assisted opening for quick and simple one-handed opening. Just pull back on the flipper or push on the thumb stud. The blade is quality 8Cr13MoV stainless steel with a handsome satin finish and a top swedge. The front handle scale is G10 — crowned and polished for a smooth feel and classy look. The back is pure steel with a sturdy frame lock to keep the blade in position until you release it. The AM-4 also features a deep-carry pocket clip with Al Mar Knives red logo emblem and—for an extra measure of visual interest — they used red standoffs.In addition to a dedication to the original designs, Kershaw kept two things in mind when creating these exciting Al Mar Knives: quality and value. Kershaw is using top-notch materials including top-of-the-line blade steel and real G10 scales. Plus, they’re paying special attention to details. Yet they’re keeping the prices down on these classic knives — which means these brilliant Al Mar Knives are now readily available to a new generation of knife enthusiasts. Specifications Blade Length: 3.50" (8.9 cm) Handle Length: 4.25" (10.8 cm) Overall Length: 7.75" (19.7 cm) Blade Steel: 8Cr13MoV Stainless Steel Blade Shape: Spear Point Blade Finish: Satin Handle Material: Contoured Polished G10 with Black-Oxide Stainless Steel Lock Locking Mechanism: Frame Lock Pocket Clip: Tip-Up, Right Deep Carry Weight: 2.8 oz. (79.4 g) Designer: Al Mar

€34.93* €49.90* (30% saved)
Ensure 35 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Lord of the Rings Replica 1/1 Gimlis Axe
Faithful replica of Gimli's axe, seen in the "Lord of the Rings" film trilogy. Authentic details and realistic materials stir every collector's blood. The axe is made of metal, wood and leather. It is approx. 86 cm long and comes with a wall mount. Details: Overall Length: approx. 86 cm Material: Metal, wood and leather Weight: approx. 2650 g

€143.10* €159.00* (10% saved)
Ensure 144 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Sidekick Bootknife
Our "Sidekick" Boot Knife is undoubtedly one of the finest available. The 4 ¾" forged 440C spear-point blade is balanced by a full tang with wrap-around stag scales. An engraved guard and rivet heads complete the picture. The polished steel sheath features the new ViseClipTM mounting, for positive attachment to boot or belt, while a nylon sheath insert provides secure blade retention for handle-down carry. A padded storage case is included. Specifications: Blade length: 4 3/4" Handle length: 4" Overall length: 8 3/4" Weight: 5.5oz Thickness: .160"

€231.20* €289.00* (20% saved)
Ensure 232 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
British 1796 Heavy Cavalry Saber
Used by British Lifeguards, Royal Horse Guards, Dragoon Guards and Dragoons through the Revolutionary and Napoleonic Wars. It was directly copied from the Austrian Pallasch 1769 heavy cavalry sword. British cavalry officer John Le Marchant attentively made drawings of the weapons carried by the Austrian cavalry during the Low Countries Campaign in 1793-95, and likely was involved in the recommendation of this pattern to his superiors. Notable for its use at Salamanca and Waterloo. Technically the 1796 heavy cavalry sword is a backsword, defined as a sword with a straight blade with one cutting edge and a spine (the "back") thickened for most of its length to give added strength. In fact, this is not a delicately maneuverable sword by any stretch of the imagination, and gained favor as a bludgeoning weapon. Troops also used the guard as a knuckle duster. The blade is forged with a single broad fuller on each side. The grip is of ribbed leather. The basket guard has ears which are riveted through the tang of the blade to give the hilt and blade a very secure connection. The hilt combines a disc guard pierced with 2 semicircular and 6 oval holes, with a single knucklebow and two slim 2-inch-long (51 mm) langets (projections from the guard, which grip the throat of the scabbard) extending from the front of the guard. Arrives sharpened and includes steel scabbard. SPECIFICATIONS: Overall 39-1/2” Blade Length: 35” Distal taper: 9/32” thick at hilt, 1/16” thick 1” from tip Wt: 2 lbs 6 oz Material: 1065 High Carbon Steel

From €223.20* €279.00* (20% saved)
Ensure 224 bonus points

this item is in stock
delivery before Christmas!

%
Tip
back on stock
Elden Ring - Moonveil Sword with Sheath, Handforged
Immerse in the Dark Fantasy of "Elden Ring" and the Mysterious "Moonveil Sword"Embark on a journey into the captivating world of "Elden Ring," a groundbreaking action role-playing game co-created by Hidetaka Miyazaki and George R. R. Martin. This collaboration promises an epic, dark, and mystical experience that pushes the boundaries of fantasy. In this world brimming with danger and secrets, the enigmatic "Moonveil Sword" awaits to be unveiled.The "Moonveil Sword" - An Enigma of Weaponry:The "Moonveil Sword" from the game "Elden Ring" stands as an icon of dark fantasy, beckoning players to explore the depths of the Elden Ring universe. With an overall length of 102 cm and a blade length of 70.5 cm, this sword is more than just a weapon; it's an artifact of fascination.Bring the enigma of the "Moonveil Sword" from "Elden Ring" to life within your collection. Immerse yourself in the world of "Elden Ring," where dark fantasy and enigmatic tales collide. Acquire this impressive sword and allow its darkness and elegance to enchant you. Details: Total length: 102cm with sheath: 105.5 cm Blade length: 70.5 cm Handle length: 21.4 cm Weight: 1.12kg with sheath: 1.36 kg Blade material:1045 Carbon Steel ,printed pattern,sharp Handle material:Hard wood wrapped with white fake leather & black rope Saya Matetial:Hardwood with dark spot Fittings :Black bronze

€135.20* €169.00* (20% saved)
Ensure 136 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Bastard Sword antiqued
The strong and fearless Swiss and Germans originally carried these early weapons, although bastard swords soon became popular in other regions such as the British Isles and Europe. The term bastard undoubtedly comes from the fact that the sword, because of its design, has no legitimate claim to being classified as either a single-handed or two-handed weapon. The two-handed sword was a weapon developed for the use of the foot soldier and had became quite common by the early 1500´s. The combat styles developed for the two-handed sword were the particular specialty of the Northern European Cultures, with the Germanic nations being quite active in its development and use. This sword comes with a sharp blade. Measurements: BLADE LENGTH: 38 3/4" OVERALL LENGTH: 50 1/8" WEIGHT: 4lb 4oz THICKNESS: .210"

€335.20* €419.00* (20% saved)
Ensure 336 bonus points

this item is in stock
delivery before Christmas!

%
M1 Bayonet
M1 Garand rifle was first issued with M1905 16" bayonet. In 1942, the US Military determined that a shorter bayonet was more useful. Existing stocks of M1905 bayonets were cut down to 10". In addition, new manufacture 10" bayonets were also produced.Cut-off-bayonets have fuller that extends to the point and new manufacture has fullers that stop about 3" from the point. This reproduction bayonet is made to original specifications from high carbon blued steel with hard plastic grips. Overall: 14-1/2" long Blade: 10" Wt: 14 oz Cut-off-bayonets have fuller that extends to the point and new manufacture has fullers that stop about 3" from the point. This reproduction bayonet is made to original specifications from high carbon blued steel with hard plastic grips. Overall: 14-1/2" long Blade: 10" Wt: 14 oz

From €63.20* €79.00* (20% saved)
Ensure 64 bonus points

this item is in stock
delivery before Christmas!

%
Teutonic Tunic
The German Order of the Teutonic Knights was formed at the end of the 12th century and played an important part in the defense of Acre during the Third Crusade. They later moved their base of operations to Transylvania to help defend Hungary against the Cumans. • This Teutonic Knight's tunic is made from medium weight white cotton. • An imposing black velvet cross has been stitched to the chest and faux leather trim the collar and shoulders. • Splits in the front and back as well as both sides make it a perfect fighting tunic and allow room for riding. This Teutonic Knights Tunic is complemented by the Teutonic Knight Cape (sold separately, Nr. 88665)

€79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
American Revolution Sabre
Circa 1775 This well-balanced, fast sword was designed for the mounted fighter. The solid steel hilt with spiral pattern and the carved hardwood grip are combined with an effective 1085 high carbon, well tempered blade. A black leather scabbard with steel mounts is included in delivery. Details: Total length: 39 1/2" Blade length: 34" Blade width: 1 1/4" Blade thickness: 3/15" Weight: 3 lbs.

From €143.20* €179.00* (20% saved)
Ensure 144 bonus points

this item is in stock
delivery before Christmas!

%
E.R.T. orange
The rescue and fielding knife E.R.T. features a sturdy N 690 blade with serrated edge. The end of the hand guard serves as slot and Phillips screwdrivers. A glass breaker, a generously sized lanyard hole and a liner lock are included. Handle with orange plastic scales with non-slip structure and photoluminescent element. With clip. A multifunctional Kydex sheath that can be worn either by Tek-Lok or Molle clip on the equipment or can be screwed in the boat or vehicle is within the scope of supply. Details: Gesamtlänge: ca. 20 cm Klingenlänge: ca. 7,5 cm Klingenstärke: ca. 5 mm Klingenmaterial: N690 Griffmaterial: Kunststoff Gewicht: ca. 175 g

€99.96* €124.95* (20% saved)
Ensure 100 bonus points

this item is in stock
delivery before Christmas!

%
United M48 Steel Mistress Hammer with Sheath
Brand new from United Cutlery is the Steel Mistress Tactical War Hammer, and this lady means business! Featuring a cast 2Cr13 stainless steel black oxide-coated head that can pummel virtually anything with ease, this powerful pink beauty doesn't have time to fool around. The pretty-in-pink handle meets a 7-3/4" defensive war hammer head with a curved back spike that offers applications as an effective breaching tool with devastating pummeling potential. The 30% fiberglass handle is nearly indestructible, and the axe head is attached to it with metal bolts. Black cord wrappings surround the handle, providing a secure, slip-free grip you can count on. Cast 2Cr13 stainless steel head Hammer head & curved spike Fiberglass & nylon reinforced handle Cord handle wrappings 15-1/2" overall length Rubberized sheath Includes carabiner

€48.30* €69.00* (30% saved)
Ensure 49 bonus points

this item is in stock
delivery before Christmas!

%
Limited Edition Excalibur Medieval Sword
Excalibur is offered as a limited edition collectible of 500 battle ready swords worldwide! Eyal Azerad, Founder of Darksword Armory: “As a collector and bladesmith, the making of Excalibur was a deeply personal project. As for many, John Boorman’s 1981 Epic Film was not only my favorite movie but, as a child, my introduction to the ‘Middle Ages’. This introduction, chrystalized John Boorman’s ‘Excalibur’ at the core of my life. Hence, forging the Excalibur medieval sword, was a deeply personal project for myself and the staff alike. We felt we owed this battle ready sword our utmost attention. Making yet another simple recreation of Excalibur was not an option. The staff and I agreed that not only did our recreation of Excalibur have to uphold the Darksword Armory standards for which we have become internationally renowned for, but also converge the highest standard of aesthetism. That being said, we have decided to offer Excalibur in a limited release.” The Excalibur is limited to 500 examples worldwide! Each battle ready sword includes: • Beautifully printed and individually Numbered Certificate • Premium grade Scabbard and optional interlaced sword belt Details: Overall Length: approx. 108 cm Blade Length: approx. 86.4 cm Blade Width at base: approx. 5 cm Handle Length: approx. 15.2 cm Weight: approx. 1730 g Please note: The sword will be delivered only with the scabbard, the "matching belt" is not included but can be ordered for an extra charge.

From €719.20* €899.00* (20% saved)
Ensure 720 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Crusader Quillon Dagger with Sheath
The Honshu Crusader Quillon Dagger was designed specifically to accompany the Honshu Broadsword as a parrying dagger. This fixed blade knife has a keenly sharp, 11 7/8” 1060 carbon steel blade with a satin finish and a blood groove. The textured and ridged, injection-molded TPR handle gives you a secure, slip-free grip even when the conditions are wet. The grip is bookended by a cast 2Cr13 stainless steel pommel and hand guard, both with a satin finish. The 18 5/8” overall dagger can be carried and stored in a genuine black leather belt sheath with snap closure strap. Details: Total length: 47 cm Blade length: 30 cm Blade material: 1060 carbon steel

€103.20* €129.00* (20% saved)
Ensure 104 bonus points

this item is in stock
delivery before Christmas!

%
Taskmaster Saw
This powerful folding saw from Kershaw is perfect for camping and hunting trips, but you'll also appreciate its outstanding performance in your own yard. Features a push-button locking mechanism and a 7" cutting edge. Specifications Overall Length:16.25" Blade Length:7.125" Blade Thickness:0.06" Blade Material:High Carbon Steel Blade Grind:Flat Finish:Satin Edge Type:Fully Serrated Handle Length:9.25" Handle Thickness:1.00"

€34.93* €49.90* (30% saved)
Ensure 35 bonus points

this item is in stock
delivery before Christmas!

%
Helmet of Sauron - Scale 1:2 Replica
A 1/2 scale replica of the blackened steel war helm of the Dark Lord Sauron™, as seen in the motion picture, THE LORD OF THE RINGS: THE FELLOWSHIP OF THE RING™. This 1/2 scale polyresin replica is 15 1/2" tall. It features weathered intaglioetched surface sculpting and blackened steel coloring that precisely match the original movie prop. It is presented with a polystone display stand sculpted in the same styling as the mace and armor of Sauron™ and includes a certificate of authenticity. Details: Height: 40 cm Material: Resin

€239.20* €299.00* (20% saved)
Ensure 240 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Historic Forge Viking Sword
Unleash the power of ancient Norse warriors with the Honshu Historic Forge Viking Sword. Measuring 38 1/2" overall and weighing 3.1lbs, it exudes both power and agility. The 5mm thick 1080 carbon steel blade ensures durability and sharpness, ready to tackle any challenge. Featuring a brass Viking-themed pommel and guard, the design pays homage to the legendary warriors of old. The brown leather grip handle provides a secure and comfortable hold, while the brown wooden scabbard offers protection and easy carrying.

€319.20* €399.00* (20% saved)
Ensure 320 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Pipe Hawk
Replicating a museum piece from the days of trade between the French fur trappers and the American Indians, our Pipe Hawk is fully functional both as a hatchet and a pipe, with a steel blade, bowl and mouthpiece. As in the original, a reaming pin (for clearing the smoke passage) is concelaed in the head of the end of the shaft. Measurements OVERALL LENGTH: 18 1/4" WEIGHT: 12oz THICKNESS: .28"

€127.92* €159.90* (20% saved)
Ensure 128 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
English or French Single-Edged Arming Sword, Royal Armouries Collection
An unusual single-edged arming sword of the mid-15th century, reputedly from the Castillon group of swords found in a nearby river and purchased by the Royal Armouries in 1984. Over 80 swords, as well as other weapons, were reputedly recovered from this one archaeological find, but this sword is without direct comparison in that group, having a distinctive hilt and very unusual single-edged blade. At first sight it looks like a regular double-edged arming sword with a central tip, but on closer inspection it has a single-edged blade, of wedge cross-section, having a false edge on the back of the blade near the tip. The blade is remarkably wide and thin, with a very acute edge geometry leading to a fine edge, sharing some physical similarities with other single-edged swords such as falchions. The crossguard quillons end in curled tips to retain an opponent’s blade, the asymmetrical grip is located towards the back edge, and the squat scent stopper pommel makes the short grip comfortable to hold. This sword could have been carried by any professional soldier of the late Hundred Years War, from a well-equipped archer to a man-at-arms or knight, or indeed as a civilian sidearm, perhaps with a buckler. Swords with comparable hilt forms are shown in art until the end of the 15th century. This sword feels very nimble, and it is deceptively light compared to its width, due to the thinness of the blade and distal taper.While it could thrust effectively against unarmored targets, it seems to be optimized for cutting, the tip being broader and the blade more flexible than a typical arming sword of the time.This replica is crafted with a better blade than the original; the blade is hand forged by an experienced, skilled blacksmith exactly in the same manner as the original, but with superior modern 1080 high carbon steel that is fully tempered and is distally tapered for proper weight distribution.The sheath is made to replicate one of the period, with a wood body and covered with leather. The tip is reinforced with a brass chape. At the throat, the leather extends upward and covers part of the guard at the ricasso.Includes a certificate of authenticity. Windlass Classic Wax and polishing cloth are included. Specifications: Overall: 93,98 cm Blade: 79,37 cm Wt: 1,33 kg

From €476.00* €595.00* (20% saved)
Ensure 476 bonus points

this item is in stock
delivery before Christmas!

%
Bushcraft Woodsman Knife
15" overall. 9 1/4" 5160 carbon steel drop point blade. Full tang. Walnut wood handles with lanyard hole. Tan and OD green DeSantis nylon belt sheath, fire starter, bottle opener, and paracord bracelet. Weight: 2lbs

€139.30* €199.00* (30% saved)
Ensure 140 bonus points

this item is in stock
delivery before Christmas!

%
Classical Rapier
Exceptional not only for its exquisite beauty, this rapier is reproduced from an original in the collection of Hank Reinhardt. This sword shows off one of the more graceful and sublime designs from a period when no two swords were made exactly alike. (There were often tremendous differences between rapiers because of varying amounts of skill of the blade maker, the hilt maker, and the cutler who assembled them.) This particular swept-hilt design, which is truly a work-of-art, was in use for over a hundred years. This light, fast and quick rapier uses a high carbon steel blade. • Overall: 44" • Blade: 36" long, 3/16” thick • Wt: 2 lbs

From €271.21* €339.01* (20% saved)
Ensure 272 bonus points

this item is in stock
delivery before Christmas!

%
Bear Grylls multi-function tool Mini, 10 functions, Compact Mini Multi-tool
Universally applicable multi-function tool for various jobs, ideal companion for at home, when camping or other excursions - 10 useful functions such as pliers or various screwdrivers, equipped for every situation - robust construction, knife with a blade length of 4.3 cm, two-handed opening - handy format , Fits into any pocket thanks to the small pack size, key ring for secure attachment to the key ring Details: Length closed: 6.4 cm Weight: 95 g Material: stainless steel

€24.49* €34.99* (30.01% saved)
Ensure 25 bonus points

this item is in stock
delivery before Christmas!

%
Dobermann IV Tactical
Dobermann IV represents the evolution of the first and most classic Extrema Ratio model: the so called K1 Dobermann. The main features of this new model is its heavy structure and its extremely flexible use: from hunting to survival environment, as well as camping, military or defensive use. For this reason, Dobermann IV has been developed in two different versions: a tactical and a sporting one. Since ' 97, the Dobermann knife has undergone significant changes in its look and design, based on the natural evolution of consumer taste and market trends, while still keeping its shape consistent with the original designs. It is produced in two different versions: This Tactical version with black blade and cordura sheath and the Classic version # 86266 with satin blade and black leather sheath. Details: Overall Length: approx. 31.5 cm Blade Length: approx. 18.5 cm Blade Thickness: approx. 6,3 mm Blade Material: N690 HRC: 58 Handle Material: Forprene

€333.52* €379.00* (12% saved)
Ensure 334 bonus points

this item is in stock
delivery before Christmas!

%
Daimyo FF Wakizashi Hi 50.8 cm Gold Eagle
An heirloom grade classic Samurai Wakizashi (companion sword) forged from folded 1095/1080/1060 carbon steel. The blade is differentially clay-tempered to harden the edge will retaining a softer spine to increase resistance to shock. This blade is given our Daimyo hand-polish, taking over 40 hours on Japanese natural stones to provide a mirror finish that provides insight into the Hada and a distinct Hadori Hamon. Matched with an intricately detailed Gold Eagle tsuba (based on an antique in the Boston Museum of Fine Arts collection) and blue Japanese silk Ito. this sword is authentically Japanese while having an American character. The centerpiece of any collection, this sword represents our smiths' best work with modern steel. Pairs perfectly with our Daimyo Forge-Folded Katana to complete a Daisho. Details: Blade length (in/cm): 20/50.8 Overall length (in/cm): 27.5/69.85 Weight (lbs/kg): 1.375/0.63 Steel: Forge Folded Tri-Steel Polish: Hand Temper: Differential Clay-tempered Bo-hi: Yes Tsuba: Gold Eagle Fuchi-Kashira: Gold Eagle Ito: Blue silk Saya: Black gloss

€999.00* €1,599.00* (37.52% saved)
Ensure 999 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
A.P.O.C Brutus - Gladius Sword
Continuing the legacy of brutality in the APOC line, we gladly introduce another Atrim design - the Brutus. Simple, light weight and a devastating ferocious cutter from the Atrim school of blade geometry. Deceiving in its weight at 1 lbs 12 oz overall, 18” 9260 blade pierces, cuts and thrusts with ease with the power you desire. A Molle compatible sheath is great to secure a bug-out-bag. Featuring all the accoutrements found in the APOC line, the Brutus is a great single-hand sword that will never betray your confidence in its abilities. Details: Main features: 46 cm long black coated blade Milled G10 handle Details: Total length: 61 cm Blade length: 46 cm Handle length: 14 cm Weight: 790 g Balance point: 6.67 cm Handle material: G10 The technical data vary slightly from piece to piece.

€183.20* €229.00* (20% saved)
Ensure 184 bonus points

this item is in stock
delivery before Christmas!

%
Steel Driver Fixed Blade
Impressive finish and function meet a mix of modern and primal design elements in this new offering from Schrade. The Steel Driver Drop Point fixed blade knife offers a balanced feel and exceptional cutting capabilities. The G10 handles ensures a solid grip, while the AUS-8 steel provides a desirable balance of sharpness, functionality and edge retention. The thick-profile black oxide blade provides the toughness that Schrade knives were built on. Details: Black Oxide Modified Drop Point Blade AUS-8 Stainless Steel Black G10 Handle 4.75” Blade Length 10” Overall Length Polyester Sheath Included

€48.30* €69.00* (30% saved)
Ensure 49 bonus points

this item is in stock
delivery before Christmas!

%
Empire Cravat
The forerunner of the modern neck or bow tie, this off white Empire Cravat is the perfect finishing touch for your formal Victorian or Steampunk look. To tie your cravat - * drape the fabric from the front of your neck over the shoulders and back to the front * cross the long end over the short end, taking the longer end underneath and passing it through the loop * you can do this one or two times depending on the desired look * then you can fluff the lightweight fabric as much or little as you like * the cravat does not require a pin to fasten, although one maybe used if desired

€63.20* €79.00* (20% saved)
Ensure 64 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
European 14th Century Arming Sword, Royal Armouries Collection
The pommel of this sword looks conventional when viewed dead-on, but turn the sword sideways and an unusual, somewhat conical shape reveals itself. The sword was reputedly found in a peat bog together with another now in Rome and is unusually well preserved. Comparable swords have been found across much of Europe. One-handed arming swords were carried as sidearms by many people at the time, often used with a shield or buckler. They can be seen used with small bucklers in the famous fencing treatise Royal Armouries Ms. I.33, as well as equipping fully armored knights in numerous manuscripts and monuments. This sword could have been carried at the beginning of the Hundred Years War, and it features several very distinctive features. The subtly shaped crossguard curves towards the blade, tapering and then swelling at the terminals, and the distinctive pommel has very particular angles and facets. The hilt sits very comfortably in the hand. The broad leaf-like straight blade is of a flattened-diamond cross-section, double-edged, with a narrow fuller to reduce mass. The width swells slightly where it meets the hilt and the gracefully curved edges finish in an acute thrusting tip. The sword is quite light for the size but has a lot of blade presence and power in the hand, being very well suited to give impressive cuts and thrusts.This replica is crafted with a better blade than the original; the blade is hand forged by an experienced, skilled blacksmith exactly in the same manner as the original, but with superior modern 1080 high carbon steel that is fully tempered and is distally tapered for proper weight distribution.The sheath is made to replicate one of the period, with a wood body and covered with leather. The tip is reinforced with a brass chape that features ornate cut-outs and an acorn tip. At the throat, the leather extends upward and covers part of the guard at the ricasso.Includes a certificate of authenticity on heavy stock.Windlass Classic Wax and polishing cloth are included. Specifications: Overall: 100,96 cm Blade: 85,09 cm Wt: 1,21 kg

From €476.00* €595.00* (20% saved)
Ensure 476 bonus points

this item is in stock
delivery before Christmas!

%
The Arming Sword
Wallace Collection, England, A.460 French, c. 1375-1400, Type type XVIII sword. By the 14th C. the classical Medieval Knight’s sword took shape in the Arming Sword. Short for close quarter combat, light, and well balanced with a sharp taper and reinforced tip, the Arming Sword proved to be a devastating weapon again the developing full plated armor of the time. The heavily tapered blade gave the sword devastating stabbing force against plated armor, while retaining its destructive cutting edge. The sword came to be known as the “Arming Sword” because it formed part of the Medieval Knight’s standard equipment. By the 14th C, the Arming Sword became the weapon of choice for many knights of the English, French and German empires. Length : 39” Handle Length: 4 ½” Blade Length: 32” Blade Width: 2 1/16” Crossguard Length: 8 5/8” Guard Depth: 7/8” Handle Circumference: 4 ¼” Weight: 2.65 lbs P.O.B.: 4 ¾” Please note: The sword will be delivered only with the scabbard, the "matching belt" is not included but can be ordered for an extra charge.

From €479.20* €599.00* (20% saved)
Ensure 480 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Sub-Hilt Tanto
Tackle any task with the Honshu Sub-Hilt Tanto. This 17 1/4" overall tanto is a unique mix of tactical and tradition and has a unique look with its sub-hilt design. This Sub-Hilt Tanto has an 11 3/8” satin finished 7Cr13 stainless steel blade which extends from the matching stainless steel guard. Just behind the guard is the stainless steel sub-hilt which gives you better control of the weapon. The textured black TPR handle ensures you’ll always have a secure grip. Store this impressive piece in its included black sheath with snap closure.

€95.20* €119.00* (20% saved)
Ensure 96 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Boshin Midnight Forge Toothpick Knife with Sheath
The Honshu Midnight Forge Boshin Toothpick Knife is an exceptional addition to the Boshin line of tactical weapons, which blends tradition and innovation and style and function. The black, 12” blade has a rock-solid, full-tang 7Cr13 stainless steel construction with a unique flat taper grind and it features weight-reducing thru-holes. The textured, ergonomically contoured TPR handle is secured to the tang with heavy-duty screws and the ridges provide a secure, no-slip grip. The tactical toothpick is 18 3/4” in overall length and it comes housed in a premium, reinforced genuine leather belt sheath, which features a paracord lanyard for lashing. Like all the swords and knives in Honshu's Boshin line, the Boshin Toothpick Knife sets a new standard for both quality and value. Details: Overall length. 47.6 cm Blade length: 30 cm Blade material: 7Cr13 stainless steel

€127.20* €159.00* (20% saved)
Ensure 128 bonus points

this item is in stock
delivery before Christmas!

%
Mace Cane
Simple and good looking, the stout solid hardwood shaft is topped with a heavy solid brass knob fashioned after a medieval mace head. Details: Total length: 36" Weight: 1 lb. 4 oz.

€39.20* €49.00* (20% saved)
Ensure 40 bonus points

this item is in stock
delivery before Christmas!

%
Helmet of Greece
The helmet of Greece has 18 gauge steel construction with an antique bronze finish. Soft adjustable padded cloth lining. • Weight: 4 lb 4 oz

€239.20* €299.00* (20% saved)
Ensure 240 bonus points

this item is in stock
delivery before Christmas!

%
Double Adjustable Medieval Sword Belt, Size L/XL
This extra long period belt is made of thick top grain black leather. The fully adjustable built-in frog allows a wide variety of LARP weapons to be carried. This functionality also allows many of our Windlass sword scabbards to be fit, as well! Also available as a Single Sword Belt (#70532). Available sizes S/M or L/XL.

€79.20* €99.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
Musha 1060 Tanto Musashi
A classic samurai combat tanto forged from 1060 carbon steel. Extremely resilient and durable, making this model a cost-effective sword for cutting practice and home defense. Mono-tempered blade and machine polished. Fitted with authentic lacquer Saya, cast iron fittings, genuine ray-skin panels and silk Ito. Details: Blade length (in/cm): 12.25/31.12 Overall length (in/cm): 19.5/49.53 Weight (lbs/kg): 1.0625/0.48 Steel: 1060 Spring Steel Polish: Machine Temper: Mono-tempered Bo-hi: Yes Tsuba: Musashi Fuchi-Kashira: Musashi Menuki: Sword Ito: Black silk Saya: Black gloss

€219.00* €399.00* (45.11% saved)
Ensure 219 bonus points

this item is in stock
delivery before Christmas!

%
Boker Titan Hunter Wood
The innovative Boker Titan Hunter is equipped with a blade made of Cronidur-30, a special steel from NASA's Space Shuttle. The high-nitrogen alloy steel was developed in Germany and has proven itself in the particularly demanding space industry. After intensive hardness tests, the steel with a hardness of 58-60 HRC was selected by the NASA and was successfully used in the particularly stressed components of the Space Shuttle.Compared to comparable steels, Cronidur-30 has over a hundred times improved corrosion resistance, which extends the service life of the steel by five times. The steel alloy is particularly fine-grained, very easy to sharpen and has high elasticity with excellent edge retention. As the leading manufacturer of sports and collectors knives in Europe, Boker has exclusive worldwide rights to use Cronidur-30 in this product segment.Solid titanium bolsters and 2.5 millimetre thick titanium plates provide the Boker Titan Hunter with unbelievable stability and yet moderate weight. The knife was designed by Armin Stütz from Austria, who has always paid special attention to the practical suitability of his hunting knives. The handle scales are made of noble certified imported desert ironwood. With lanyard hole. Details: Overall length: 19,9 cm Blade length: 8,4 cm Weight: 136 g Blade thickness: 3,5 mm Blade material: Cronidur-30 Handle material: Wüsteneisenholz Designer: Armin Stütz Lock: Linerlock

€284.00* €355.00* (20% saved)
Ensure 284 bonus points

this item is in stock
delivery before Christmas!

%
Steel Greaves
Greaves are designed to protect the lower leg from the cut of a sword or the vicious kicking that occurred during battle. Although worn by many Roman units, greaves were not worn by all. These replica steel greaves are based on patterns pictured in reliefs on Trajan's Column in Rome and feature an articulated knee piece for extra protection. Details: Length: 18 3/4" Width: 8 3/4" Bend: 5 1/2"

€71.20* €89.00* (20% saved)
Ensure 72 bonus points

this item is in stock
delivery before Christmas!

%
Daimyo FF Tanto 31,12 cm Gold Eagle
An heirloom grade classic Samurai combat Tanto forged from folded 1095/1080/1060 carbon steel. The blade is differentially clay-tempered to harden the edge will retaining a softer spine to increase resistance to shock. This blade is given our Daimyo hand-polish, taking over 40 hours on Japanese natural stones to provide a mirror finish that provides insight into the Hada and a distinct Hadori Hamon. Matched with an intricately detailed Gold Eagle tsuba (based on an antique in the Boston Museum of Fine Arts collection) and blue Japanese silk Ito. this sword is authentically Japanese while having an American character. The centerpiece of any collection, this sword represents our smiths' best work with modern steel. Pairs perfectly with our Daimyo Forge-Folded Katana to complete a Daisho. Details: Blade length (in/cm): 12.25/31.12 Overall length (in/cm): 19.5/49.53 Weight (lbs/kg): 1.0625/0.48 Steel: Forge Folded Tri-Steel Polish: Hand Temper: Differential Clay-tempered Bo-hi: Yes Tsuba: Gold Eagle Fuchi-Kashira: Gold Eagle Ito: Blue silk Saya: Black gloss

€799.00* €1,399.00* (42.89% saved)
Ensure 799 bonus points

this item is in stock
delivery before Christmas!

%
Gil Hibben Old West Bowie Damascus Edition
This knife is an actual copy of a typical Bowie knife of the 1830s. The story of the Bowie began on a sandbar of the Mississippi River above Natchez, Mississippi on September 19, 1827. A brawl that eventually involved Col. James “Jim” Bowie, who, having been shot and stabbed, successfully defended himself killing Major Norris Wright and wounding Alfred Blanchard with what onlookers described as a “large butcher knife.” This and other tales of Bowie’s abilities with a knife led to the widespread popularity of what became known as the “Bowie” knife. Bowie joined the Texas militia at the beginning of the Texas Revolution. Legend has it that Bowie died in his bed, knife at his side, after emptying his pistols into numerous Mexican soldiers. This elegant recreation offers a hardwood handle accented by the gold-plated blade catcher and guard which are reminiscent of the styling of original Bowies. The classic approx. 35.5 cm Damascus steel blade is folded to an astounding 3456 layers. Within the scope of supply is a genuine leather sheath with brass plated star and Hibben Knives logo. Details: Blade Length: approx. 35.5 cm Blade Material: Damascus steel Handle Material: Hardwood This knife has just won the IWA Knife Award in Nuremberg on IWA show 2010 : The decision in the Collector Knives category was in favour of the Gil Hibben Old West Bowie Damascus Edition entered by Swords & more GmbH. It’s the famous names that make this knife so fascinating. Gil Hibben is also known to laymen as the creator of the “Rambo” film knife, and experts claim that the model for this knife originated from Wild West legend Jim Bowie himself. The jury added with a wink: “A lot of knife for the money”!

€209.30* €299.00* (30% saved)
Ensure 210 bonus points

this item is in stock
delivery before Christmas!

%
Engineer Pants Size M
These Steampunk engineer pants are fashioned in the turn of the century Jaipur (jodphur) style. The brown striped cotton blend fabric gives an authentic period look. Velcro closure around the calves section. Available in S, M, L, XL. Click here for the Clothing & Hats Sizing Charts.

€71.20* €89.00* (20% saved)
Ensure 72 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Full Tang Tactical Wakizashi with sheath
This full-tang tactical wakizashi is built to perform! The mirror-polished, high-carbon steel blade is full-tang and features a deep blood groove as well as the Honshu™ etch. The handle features non-slip, checkered Poly ABS scales, brass dowel rod bolts and a paracord lanyard that can be untied for use as a lashing cord. The solid brass hand guard is drilled with lashing holes. The sword fits perfectly into the solid wood and polycarbonate scabbard, with matching paracord wrap, and a solid brass cord fitting. Includes a smooth-lined storage cloth to protect your new treasure! Details: Overall length: approx. 77 cm Blade length: approx. 50 cm Blade material: High-carbon steel Handle material: Poly ABS

€231.20* €289.00* (20% saved)
Ensure 232 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Boshin Black Damascus Katana Sword
An ancient Japanese legend, reincarnated in the 21st century. Countless innovations yield a distinctly modern katana. A modern legend, the Honshu Boshin Black Damascus Katana fuses proven, time-honored tradition with the best in 21st century innovation. Chic contemporary style and state-of-the-art appointments meld seamlessly with classic form and traditional hand-craftsmanship. Even the Damascus steel - a centuries-old steel variety - is reimagined and reworked for an exciting new look. Display-worthy sword that refuses to be relegated to display stand. The Boshin demands real-world action. Trading delicate, traditional trappings like ray skin and cord for tough, ultramodern materials like TPR, the Boshin is designed for serious, real-world use. It's remarkably well-balanced and an all-around pleasure to wield, and it boasts savage cutting power that's second to none. Details: Blade material: Damascus steel Total length: 105cm Blade length: 77cm

€239.20* €299.00* (20% saved)
Ensure 240 bonus points

this item is in stock
delivery before Christmas!

%
Caimano Nero N.A.
Caimano Nero N.A. is the non-automatic version of the tactical knife that Extrema Ratio has supplied to the G.O.I. (Operational Raiders Group) of the Italian Navy.The blade is a 4 mm thick asymmetrical spear point. The serrated part of the edge allows to cut highly-resistant cables and fabrics without losing its sharpening.The bottom part of the handle is designed to enhance the grip for a rapid extraction of the knife from the pocket. It is also equipped with a hard-metal glass breaker.The DLC-coated titanium clip can be positioned in three different angles on both sides allowing to conceal the knife as much as possible inside the pocket. TECHNICAL SPECIFICATIONS: Type: Folding knife Use: Tactical Weight (g): 162 Weight (oz): 5,71 Blade Lenght (mm): 93 Blade Lenght (in): 3,66 Overall Lenght (mm): 231 Overall Lenght (in): 9,1 Blade Thickness (mm): 4 Blade Thickness (in): 0,15 Partial Serration (mm): 20 Partial Serration (in): 0,78 Main Grid: Flat Blade Material: Böhler N690 (58HRC) steel Blade Finishing: MIL-C-13924 Burnishing Handle Material: Anticorodal Anodized Aluminum

€307.12* €349.00* (12% saved)
Ensure 308 bonus points

this item is in stock
delivery before Christmas!

%
Steelpower
Strong and reliable all-rounder. The blade is made of 440 stainless steel. The handle and the framelock are also made from this stable material. The clip is positioned to prevent an over-stretching of the frame lock. With lanyard hole. Details: Overall Length: approx. 16.9 cm Blade Length: approx. 7.2 cm Blade Thickness: approx. 2.5 mm Blade Material: 440 steel Handle Material: Stainless steel Weight: approx. 96 g

€23.20* €29.00* (20% saved)
Ensure 24 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Boshin Damascus Double Edge Sword With Scabbard
The Honshu Boshin Damascus Double Edge Sword fuses tradition and innovation to yield a masterwork of modern sword design. The sword has a 30 1/2” Damascus steel blade that’s been folded more than 800 times, making it unrivaled in sharpness and strength. Trading traditional trappings for sleek contemporary style, the cutting edge Boshin is an undeniably modern weapon. Textured TPR shrouds the handle for an ergonomic no-slip grip and the handle is crowned with an oversized polished steel pommel. The guard snubs fanciful ornamentation in favor of a practical pointed ellipse design. In keeping with the Boshin sword’s clean, functional motif, the scabbard is wooden with a semi-gloss black finish and features black faux leather wrapping and cotton cord. Wielding the Honshu Boshin Damascus Double Edge Sword is almost Zen-like - you just have to experience it for yourself! Details: Total length: 103.66 cm Blade length: 77.47 cm Blade Material: Damascus steel

€255.20* €319.00* (20% saved)
Ensure 256 bonus points

this item is in stock
delivery before Christmas!

%
Archers Axe
Circa 1300 Archers always carried an in-close fighting sidearm, and an axe like this one was a perfect choice as both a good worker and a weapon. The flat poll was good for hammering in stakes that were often used in the defensive line, and then the blade could be used to sharpen them. This is a basic European pattern that was carried and used by infantry as well as mounted warriors as its design is just so practical for all kinds of uses in the field as well as war. Tempered steel head on a good hardwood shaft. Add this highly functional piece of history to your collection. Details: Overall: 50.8 cm Blade: 12.07 cm x 9.84 cm Weight: 680.4 g

From €63.19* €78.99* (20% saved)
Ensure 64 bonus points

this item is in stock
delivery before Christmas!

%
BF0 R CD, stone washed
The new Extrema Ratio BF0 R CD is one of the smallest among the Basic folders. Its handle produced in technopolymer makes it light and resistant, also thanks to its steel internal frame. BF0 R CD employs the trustworthy LINER-LOCK blade blocking system and It keeps all BF0 characteristics improved with new High Speed Razor Opening System. TECHNICAL SHEET Weight g.:53 Weight oz.:1,86 Blade Length (mm):55 Blade Length (in):2,16 Total Length (mm):140 Total Length (in):5,51 Blade Thickness (mm):2,5 Blade Thickness (in):0,098 Blade Material:BöHLER STEEL N690 (58HRC) Blade Finishing:STONE WASHED Main Grid:FLAT Handle Material:NYLON

€71.20* €89.00* (20% saved)
Ensure 72 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Scimitar
The deeply curved slashing blade of the Scimitar recalls battles between the Saracen and Crusader. The hardwood grips and hawksbill pommel are typical of the originals. This sword comes with a sharp blade. BLADE LENGTH: 30 1/2" OVERALL LENGTH: 37" WEIGHT: 3lbs 4oz THICKNESS: .23"

€207.20* €259.00* (20% saved)
Ensure 208 bonus points

this item is in stock
delivery before Christmas!

%
Hibben Darkwood Legacy III Fighter Knife With Sheath
Renowned knifemaker Gil Hibben has been designing and producing top quality edged collectibles for more than 50 years. His son, Wesley, has been making and designing custom knives for more than 25 years. For the first time ever, Gil and Wes teamed up to create a priceless collectible series. The latest addition to the Hibben Legacy collaboration, this Darkwood Legacy III Fighter knife features a 7”, 5Cr15 stainless steel blade polished to a mirror finish. The highly polished stainless steel guard, sub-hilt and pommel add even more elegance to the black premium wooden handle. Details: Blade length: 18 cm Total length: 32 cm Blade material: 5Cr15 stainless steel

€155.21* €194.01* (20% saved)
Ensure 156 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Historic Forge Oakeshott 14th Century Sword
The Honshu Historic Forge Oakeshott 14th Century Sword is a masterpiece that transports you back to the medieval era. Crafted with utmost precision, this sword features an authentic 14th century design, making it a must-have for historical enthusiasts and collectors alike. With a 26 7/8” carbon steel blade, this sword is built to withstand the test of time. The blade's exceptional strength and durability are enhanced by the Rockwell Hardness HRC 47-52, ensuring its reliability in combat or display. The 2" forward point of balance from the hilt allows for effortless maneuverability and accurate strikes. The textured leather handle provides a secure and comfortable grip, allowing for precise control and handling. The rounded brass colored pommel with intricate etchings adds an elegant touch to the overall design, showcasing the craftsmanship and attention to detail put into this sword. To ensure its preservation and easy transport, the sword comes with a leather wrapped scabbard. This scabbard not only protects the blade but also adds to the aesthetic appeal of the sword. Whether you're a history enthusiast, a collector, or a martial arts practitioner, this Oakeshott 14th Century Sword is a remarkable piece that symbolizes the valor and legacy of medieval warriors. Unleash your inner knight with this unique and meticulously crafted sword. Its authentic design, exceptional quality, and stunning aesthetics make it a valuable addition to any sword collection. Whether for display, reenactments, or ceremonial purposes, the Honshu Historic Forge Oakeshott 14th Century Sword is sure to impress with its timeless appeal and undeniable charm. Details: Blade Length: 34" Blade Material: 1065 High Carbon Steel Weight: 2.65lbs

€239.20* €299.00* (20% saved)
Ensure 240 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Spartan
The Spartan Sword is an exceptional addition to Honshu’s rock solid tactical weapon line. Always innovative and always at the forefront of the industry, United Cutlery’s blades are meant for real world use so, their construction has a strength and quality that cannot be matched! This reimagining of an ancient weapon has a 16 1/2” 7Cr13 stainless steel blade that has a phenomenally sharp blade, which features a classic blood groove and modern, weight-reducing thru-holes in the spine. The hefty stainless steel guard is curved back toward the handle, giving your hand a sturdy buffer and assisting in firming up your grip when using the knife. The ergonomic, TPR injection handle is tough and grippy with finger grooves and a textured pattern. The 23” overall length Spartan Sword snaps securely into its heavy-duty leather belt sheath for storage and carry and the handle has a brass lanyard hole to give you another storage or carry option. Details: Total length: 58.4 cm Blade length: 41.9 cm Blade material: 7CR13 stainless steel

€95.20* €119.00* (20% saved)
Ensure 96 bonus points

this item is in stock
delivery before Christmas!

%
Honshu Historic Forge 14th Century Italian Longsword
Step back in time with the Honshu Historic Forge 14th Century Italian Longsword, a legendary weapon that embodies the craftsmanship and elegance of medieval Italy. Crafted with precision, the 115.8cm Honshu Historic Forge Longsword features a 87.63cm blade made from 1080 carbon steel, renowned for its strength and sharpness. The polished steel handguard and pommel add a touch of sophistication, while ensuring durability and balance. The wooden handle, wrapped in genuine brown leather with embossed cord grooves, provides a secure and comfortable grip, enhancing both aesthetics and functionality. This longsword comes complete with a brown leather scabbard, adorned with polished steel accents, offering not only protection for the blade but also an authentic medieval appearance. Details: Overall Length: 115.8cm Blade Length: 87.63cm Blade Material: 1080 Carbon Steel

€479.20* €599.00* (20% saved)
Ensure 480 bonus points

this item is in stock
delivery before Christmas!

%
Tarpon Knife
The Tarpon knife features a 420HC (High Carbon) surgical quality stainless steel. Every edge is hand finished and polished to a razor sharpness. The blasted satin finish is achieved by sand or bead blasting the exposed metal portion of the blade. The skeletonized steel handle gives this fixed blade a unique look and feel, while keeping the weight in check. In addition to holding the knife, the Kydex sheath also has a paracord lanyard so this knife can be carried around the neck. About the Designer Joe Flowers is responsible for many of the interesting blade designs throughout the Condor product line. Joe writes for a myriad of magazines and publications, and contributes regularly to the outdoor community, concentrating in woodcraft and primitive living. His knowledge of outdoor gear led to consulting on equipment design and function for many companies. Joe holds a degree in Zoology with a minor in Entomology, and researches heavily into all things outdoors. Joe Flowers teaches fitness, martial arts, organizes youth camps, and hosts outdoor skills and survival classes around the US. Joe is an avid naturalist, hunter, fisherman, herpetologist, videographer, beekeeper, knife thrower, guide, and regularly travels internationally in search of knife knowledge and unique animals. You can find Condor® on Joe’s side when he is deep in the Amazonian rain forest, or high in the deserts of Utah. Specifications • Blade Length: 4-1/2" • Overall Length: 8-7/8" • Blade Thickness: 2.5 mm • Blade Material: 420HC Stainless Steel • Blade Finish: Blasted Satin • Handle Material: 420HC Stainless Steel • Sheath Material: Kydex • Designer: Joe Flowers • Weight: 3.1 oz.

€31.43* €44.90* (30% saved)
Ensure 32 bonus points

this item is in stock
delivery before Christmas!

%
T4000 C
The T4000 C continues the purest Extrema Ratio tanto collection, for those who love Japanise profile blades but do not want to waive the typical tactical accessories like handle and sheath. Details: Weight g.: 196,0 Weight oz.: 6,9 Blade Length (mm): 104 Blade Length (in): 4,1 Total Length (mm): 208 Total Length (in): 8,2 Blade Thickness (mm): 4,0 Blade Thickness (in): 0,16 Blade Material: BöHLER N690 STEEL (58HRC) Blade Finishing: MIL-C-13924 BURNISHING Main Grid: FLAT Handle Material: FORPRENE

€207.20* €259.00* (20% saved)
Ensure 208 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Brandenburg Rapier
This stunning 17th century rapier has an expertly crafted swept & twisted metal basket. The heavily carved horn grip mimics the elegantly twisted metal of the hilt and is hand wound and inset with a single steel accent wire that provides an excellent grip while dueling. Better yet was the aristocratic, dashing look it gave the wearer while rakishly hanging from the belt. Hand forged, high carbon steel blade with flattened oval cross section. Extended, custom engraved ricasso for strength. Includes leather scabbard with twisted metal accents completing this magnificent and fast rapier. Made by Windlass Steelcrafts®. Details: Overall Length: approx. 112.4 cm Blade Length: approx. 95.3 cm Blade Width: approx. 2.1 cm Blade Thickness: approx. 0.47 cm Blade Material: High Carbon Steel Overall Weight: approx. 1248.2 g

From €263.20* €329.00* (20% saved)
Ensure 264 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Gobbo Shield
Epic Armoury weapons are designed for durability and safe use. The theme of these weapons ranges from the historical to high fantasy. This shield has a horizontal handgrip. The handgrip is one complete unit with handle and adjustable leather strap build in a frame, for maximum shield control. Details: Height: 55 cm

€80.00* €100.00* (20% saved)
Ensure 80 bonus points

this item is in stock
delivery before Christmas!

%
Roman Commander Cuirass
This stunning muscle cuirass and back plate have been hand formed by our master metalsmiths from steel, then plated in brass and antiqued. Amazing details like the intricate metal tie downs and famous bull sculpted from metal sitting in the center over the heart. Includes leather straps and ties. • Fits body types from 5′ 9″ to 6′ 2″ best.

€367.20* €459.00* (20% saved)
Ensure 368 bonus points

this item is in stock
delivery before Christmas!

%
Sword with Crosses
This late cruciform sword bears five bold crosses on its blade. Legend tells us that the heroine Joan Of Arc bore such a sword during her campaigns in the Hundred Years Wars between England and France. Pommel and guard are steel and the grip has been wrapped in leather cord. The high carbon blade has been fully tempered. A scabbard is included. Details: Total length: 38 1/2" Blade length: 32" Blade width: 2" Blade thickness: 3/16" Weight: 3 lbs. 6 oz.

From €223.20* €279.00* (20% saved)
Ensure 224 bonus points

this item is in stock
delivery before Christmas!

%
back on stock
Rings of Power - Galadriel Dagger
Immerse yourself in elegance and mystery with the unofficial Galadriel Dagger from the Rings of Power series. Inspired by the legendary Galadriel, this dagger is an exceptional piece that captures the essence of her power and beauty.The dagger's handle is meticulously crafted from steel, with a polished silver and gold finish, giving it a regal appearance. With a total length of 46.5cm, this dagger is compact and easy to handle, perfect for complementing your collection or costume.The steel blade features a gold and chrome finish that gives it a distinctive shine and appearance. Every detail has been carefully worked to reflect the exquisiteness of Galadriel's dagger. Details: Full Length: 46cm Blade length: 29cm Handle Length: 13cm Grip length: 9cm Width cross-guard: 4cm Blade material: Stainless Steel Scabbard material: Faux Leather

€55.20* €69.00* (20% saved)
Ensure 56 bonus points

this item is in stock
delivery before Christmas!

%
The Nomad
Rangers are a fantasy character 'archetype,' idealized warriors who fight with honour and have a deep and abiding respect for nature. From Strider and the Dunedain Rangers in Tolkien's Lord of the Rings novels to Drizzt Do'Urden in the Forgotten Realms books, Rangers are one of the most popular characters in fantasy fiction and role-playing games. Frequently depicted as the "lone warrior" character fighting in the shadows against evil, Rangers fight with sword, knife and bow, and are talented in all manner of wilderness and tracking skills. Friend of elves and other mystical creatures, they have a tendency to wander the land alone in search of injustice. Hence the name of this Ranger-inspired weapon: 'The Nomad.' Details: Weight: approx. 1589 g Overall Length: approx. 107 cm Blade Length: approx. 76 cm Blade width at base: approx. 3.8 cm POB: approx. 2.5 cm from Guard Please note: The sword will be delivered only with the scabbard, the "matching belt" is not included but can be ordered for an extra charge.

From €639.20* €799.00* (20% saved)
Ensure 640 bonus points

this item is in stock
delivery before Christmas!

%
AK-47
Designed by celebrated custom knife maker Andrew Demko, the Cold Steel AK-47® series has proved exceptionally popular with Military personnel and Law Enforcement professionals. Their American CTS XHP Alloy Steel blades are vacuum heat-treated and sub-zero quenched for maximum toughness, then hollow ground by hand until they reach levels of sharpness only seen on a surgeon's scalpel. They are then DLC (Diamond Like) coated for corrosion and abrasion resistance, while enhancing the knives already astounding cutting power by reducing friction. Available in two sizes, the AK47 is equipped with ergonomic American G-10 handles that offer incredibly secure grip even when wearing thick gloves and working in cold or wet conditions. These tough hard use knives also feature a unique solid 6061 Aluminum pommel that can focus strikes, serve as an impact tool and function as a "less than lethal" option in a last ditch self-defense situation. The AK47 is also equipped with our state of the art, record breaking Tri-Ad® lock. Proven again and again to be superior to any other lock on the market today in terms of strength and shock resistance. Finally, to assure fully ambidextrous and lightning fast access, each AK-47® comes with our patented thumb plate - allowing the knife to be drawn and simultaneously opened by snagging it on the edge of a pocket! Specifications: Weight: 5.3 oz. Blade Thickness: 3.5 mm Blade Length: 3 1/2" Overall: 9" Handle: 5 1/2" Long. G-10 Steel: Carpenter CTS® XHP Alloy w/ DLC Coating NEW BLADE STEEL Pocket Clip: Ambidextrous Pocket / Belt Clip This is an item from the Cold Steel program in 2015.

€122.49* €174.99* (30% saved)
Ensure 123 bonus points

this item is in stock
delivery before Christmas!

%
Gil Hibben Diamondback Knife And Sheath
Knifemaker extraordinaire Gil Hibben continues to design exceptional knives made for hard everyday use. His Diamondback is a smaller fixed-blade designed to fit comfortably on your side. The knife has a 3 5/8”” full-tang, 7Cr17 steel blade with brass fileworked accents along the tang, extending from a nickel silver bolster with a high-polish finish. The handle scales are a rich, reddish brown pakkawood, accented with detailed mosaic pins and secured with nickel silver pins. The 7 7/8” overall fixed blade slides securely into a premium leather sheath and the handle has a brass lanyard tube. Details: Total length: 20 cm Blade length: 9.2 cm Blade material: 7Cr17 steel

€55.20* €69.00* (20% saved)
Ensure 56 bonus points

this item is in stock
delivery before Christmas!

%
Moonshiner Knife
The blade is made from German 1075 High Carbon Steel and are heat treated and annealed to about 56-58 Rockwell hardness. The edge is hand finished and polished to razor sharpness. The hardwood handles are made from hard woods of Central America, similar to Hickory. It is finished with a smooth grip and is known for its long durability. Includes a high quality, heavy duty, handcrafted leather sheath with a swiveling belt loop that allows the tool to swing out of the way while moving through brush or the jungle. The tool can also be swung out of the way while riding in a truck or car, thus not poking one in the side as a conventional knife sheath. Features • Blade: 1075 High Carbon Steel • Blade Finish: Polished • Handle: Hardwood • Sheath: Handcrafted Welted Leather Specifications • Blade Length: 9" • Overall Length: 14-3/4" • Thickness: 5.0 mm • Weight: 1.30 lbs.

€68.01* €85.01* (20% saved)
Ensure 69 bonus points

this item is in stock
delivery before Christmas!

%
Hibben Hellfyre Highlander Bowie Knife with Sheath
This is a Gil Hibben masterpiece that you absolutely have to add to your collection right now! No ifs, ands or buts! If you don’t, you’ll always regret it! The Hibben HellFyre Highlander Bowie Knife was crafted using the exclusive HellFyre Damascus forging process, which is pure innovative genius. The visually striking, razor-sharp, 8 3/4” HellFyre Damascus steel blade extends from a hefty, metal handguard with a black chrome finish. The handle is wrapped with copper colored wire to complement the copper tones in the blade and the pommel is metal with a black chrome finish. The 13 1/2” overall bowie can be carried and protected in its premium, black leather belt sheath with snap strap closure. Details: Total length: 34.3 cm Blade length: 22.2 cm Blade material: Hellfyre damascus steel

€199.20* €249.00* (20% saved)
Ensure 200 bonus points

this item is in stock
delivery before Christmas!

Bowie N690 Stag
The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely sturdy blade made from nitrogen-alloyed N690 and exclusive handle scales made from carefully selected stag. Due to the considerable size and thickness of the handle scales, it was difficult and expensive to find the right supplier for premium-grade stag. At last, the search was successful, and we are happy to offer our many Bowie knife fans a high-end classic version. Handcrafted by Boker Manufactory Solingen. Comes with a high-quality western leather sheath and a new version of the historic Boker tree symbol. Details: Overall length: 33,0 cm Blade length: 17,5 cm Weight: 537 g Blade thickness: 6,5 mm Blade material: N690 Handle material: Hirschhorn Lock: Feststehend

€469.00*
Ensure 469 bonus points

this item is in stock
delivery before Christmas!

%
Ermes Black Operativo
ERMES is the commemorative knife designed with the Special Operative Helicopter Regiment (R.E.O.S.) which is part of the Italian army aviation.R.E.O.S. is the operational unit of helicopters supporting the special forces composed by specifically trained staff, particularly trained and equipped in order to support military activities in every operational context.The stylized knife guards represent the wings present in the heraldic symbol of the regiment.It is available in two different versions: “ERMES ORDINANZA” with satin blade and ABS suitcase “ERMES OPERATIVO” with burnished bladeThe steel used is the reliable Bölher N690Co heat treated at 58 HRC. Fiberglass-reinforced polyamide FRN (Fiber Reinforced Nylon) was chosen for the handle.The hybrid sheath in Kydex and fabric has a belt attachment with MOLLE system. TECHNICAL SHEET Weight g.: 229 Blade Length (mm): 140 Total Length (mm): 256 Blade Thickness (mm): 6,3 Blade Material: BöHLER N690 STEEL (58HRC) Blade Finishing: MIL-C-13924 BURNISHING Handle Material: NYLON / FIBER GLASS (FRN)

€346.72* €394.00* (12% saved)
Ensure 347 bonus points

this item is in stock
delivery before Christmas!

%
FKMD Havoc Tanto
Mike Vellekamp enriches the FKMD series with a new folder, the Havoc. The titanium shell with integrated framelock and a self-supporting G10 front shell give maximum stability and a light weight. The flat build provides excellent carrying comfort. The coated blade is made from N690, which guarantees a high corrosion resistance and long cutting performance. The knife’s curved handle form allows holding it further front for precise cutting. The tanto blade is coated with black PVD and guarantees versatility and stability. The G10 shell is black. Details: Length: 23.5 cm Blade length: 10 cm Blade thickness: 4 mm Weight: 138 g

€127.97* €159.96* (20% saved)
Ensure 128 bonus points

this item is in stock
delivery before Christmas!

%
Kill Bill - Hattori Hanzo sword - handforged
This is the Hattori Hanzo Kill Bill movie sword used by Uma Thurman in the movies Kill Bill 1 and 2. Since quite a long time there were only decorative swords on the market matching the Kill Bill theme. But now there is the first real razor sharp handforged Kill Bill sword for sale ! The blade is polished very sharp so you can do cutting test with your Hanzo sword right now ! There are 2 megukis in the handle which hold the blade tight. The handle wrapping is made from leather and under it there are 2 nice menuki. The fittings are made from blackened iron and show blossoms. The blade is made from high carbon steel and has a fake temper line. Right behind the habaki the Hanzo lion is engraved on the blade. This katana will be delivered together with a high quality stand and a maintenance kit. Details Total Length : 102 cm Blade Length : 70,5 cm Handle Length : 29 cm Weight : ca 1.32 kg

€135.20* €169.00* (20% saved)
Ensure 136 bonus points

item is available on 28.11.2024 . preorder now

%
back on stock
1840 Non-Commissioned Sword
The 1840 non commissioned sword was carried by American soldiers for over 70 years; a period which included the Mexican War, Civil War and Spanish American War. The single edged blade has a single broad fuller running from the ricasso to near the point. The entire hilt is cast brass, the grip is ribbed, the pommel is global with a capstan and the grip is flanked by kidney-shaped hand guards. The 1840 NCO sword comes with a steel scabbard. Blade length: 80.6 cm Blade: 1065 High Carbon Steel Weight: 0,81 kg Edge: Unsharpened P.O.B.: 8,73 cm Thickness: 4.8 mm - 3.2 mm Width: 21.6 mm Grip Length: 8,89 cm

From €111.20* €139.00* (20% saved)
Ensure 112 bonus points

Delivery before Christmas

%
Glamdring – The Sword of Gandalf the Grey
In the Third Age of Middle-earth, the old and powerful Wizard Gandalf and his Company of Dwarves came upon a troll lair in Rhûdaur. There they found two ancient Elven swords and a knife. The exact history of these blades is not certain, but when the Elf lord Elrond examined them in Rivendell he determined they were well-known and ancient blades used in the Goblin Wars to slay many Orcs in the First Age. The sword named Glamdring was forged by the high Elves of the West, in the hidden city of Gondolin. Glamdring survived, only to be found thousands of years later by Gandalf and his companions. Glamdring is an exquisite example of the height of Elven swordcraft, and a weapon befitting an Elven king. Gandalf claimed Glamdring for his own and wielded the sword through the Quest for Erebor, using it against the Goblins of the Misty Mountains, and later on the quest to destroy the One Ring. The great sword remained at Gandalf’s side until the end of his days in Middle-earth. This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop of New Zealand and used in the motion picture, THE HOBBIT: AN UNEXPECTED JOURNEY. United Cutlery, industry leader in fine movie reproductions, has meticulously recreated the prop using only the finest grade materials and craftsmanship. Close attention to detail was a top priority. The Glamdring sword is 120.96 cm overall, featuring a stainless steel blade, solid metal hilt parts, faux blue jewel inlays, and a genuine leather-wrapped grip. It is presented with a wood wall display and includes a certificate of authenticity. Details: Overall Length: 120.96 cm Blade Length: 89.53 cm Blade Material: AUS-6 Stainless Steel Handle Material: Cast metal with leather wrapped grip and simulated gemstones Display: Wood with wood grain finish and silk screen graphic

€295.20* €369.00* (20% saved)
Ensure 296 bonus points

Delivery before Christmas

%
The Lord of the Rings - Boromir's Dagger
Bring home a piece of Middle-earth with this authentic replica of Boromir’s Dagger from The Lord of the Rings. Crafted with meticulous attention to detail, this iconic dagger is more than just a collectible—it’s a symbol of bravery and honor. The 5mm thick 420 stainless steel blade boasts a sleek satin finish, perfectly capturing the craftsmanship of Gondor. At 35.56 cm overall, with an 22.22 cm blade length, this dagger is a true-to-life reproduction, designed for fans and collectors alike. The handle, made from durable ABS, is wrapped in wire, ensuring a comfortable and secure grip, while the included wall plaque allows you to proudly display Boromir’s legendary dagger in your home. Details: Overall Length: 35.56 cm Blade Length: 22.22 cm Blade Material: 420 stainless steel Please note: The current product image is for prototype purposes only, and the final design of the Boromir Dagger may be subject to change.

€191.20* €239.00* (20% saved)
Ensure 192 bonus points

item is available on 26.12.2024 . preorder now

%
Atlantean
Conan the Barbarian is a literary character created by Robert E. Howard in a series of fantasy pulp stories published in Weird Tales in the 1930s.The Conan stories take place on Earth, but in the mythical (created by Howard) "Hyborian Age", between the time of the sinking of Atlantis and the rise of the known ancient civilizations. Howard was a friend of H. P. Lovecraft, and the two would sometimes insert references to elements of each others' settings in their works; the Conan stories thus could be said to have originally occurred in the Cthulhu Mythos universe. Modern editors have since reworked many of the original Conan stories, however, diluting this connection.Length 102 cm Blade 72 cmWeight 3.72 kgBlade Material: AISI 420 SteelThe matching sheath for the Conan Atlantean sword can be found in our shop under the number 88336.

From €351.20* €439.00* (20% saved)
Ensure 352 bonus points

Delivery before Christmas

%
Persian Scimitar
The original scimitar was called a shamshir, (which meant "lion's tail") and had a deeply curved blade that was almost a half circle. Developed in Persia, this type of blade was effective for draw cuts, but other than that, of limited utility. This caused the blade to shift its shape into a more useful version, which we have chosen to copy. This is a beautiful and romantic sword copied from the Hank Reinhardt collection. The blade is quite effective, being able to draw cut as well as slash, and the point is quite useful in the "hooking" thrust often used. Made from high carbon steel by Windlass Steelcrafts®. Grip is wood, and the guard and scabbard furniture are steel. Scabbard features metal throat, mid-collar and chape. SPECIFICATIONS: Overall Length: 36" Blade Length: 30-1/2" Blade Width: 1-1/8" Blade Tickness: 3/16" Weight: 1 lb, 7 oz Blade Material: 1075 High carbon steel.

From €215.20* €269.00* (20% saved)
Ensure 216 bonus points

Wird vor Weihnachten geliefert

%
back on stock
15th Century Longsword
The longsword, often called a hand-and-half, saw a great deal of service as a weapon of war, but was also employed a great deal as a civilian weapon of self- defense. Coupled with a dagger, the longsword was an excellent defense against robbers, thieves, footpads, assassins and even some of the robber bands that might roam the countryside. A good serviceable point allowed it to be used for thrusting, and a medium weight allowed it to be used easily and carried with equal ease. This weight also allowed it to be used with one hand with a dagger in the other. But when needed, it could be gripped with both hands for a very powerful cut. Pommel and guard are steel. Grip is wood wrapped with leather and wire. A beautiful and very functional sword. A scabbard is included. Details: Total length: 45 1/2" Blade size: 36 1/2" long, 1 3/16" wide, 3/16"" thick Weight: 3 lbs. 4 oz.

From €207.20* €259.00* (20% saved)
Ensure 208 bonus points

Delivery before Christmas

%
MK-9 Legacy - Black G-10 Version
The MK-9 Legacy impresses not only with its appearance, but with a multitude of well thought-out functional elements. The size and appearance is the same as Dietmar Pohl's legendary MK-9 concept, but the design, which was conceived as a combat knife, is transformed into a survival knife with a great sense of form, detail and functionality. Key elements include the back saw, screwdrivers on the handguard, elongated holes in the handguard for attaching lanyards, a cavity for survival gear inside the handle, a striking element at the end of the handle, and a key for opening the handle screws. The MK-9 was crafted with only selected and high-quality materials. The massive Spearpoint blade, 230 millimetres long and 6,2 millimetres thick, is made of the high-alloy carbon steel Niolox. It impresses with properties such as high rust resistance and special cutting durability. The blasted surface of the blade prevents reflection and emphasizes the technical look of the Legacy. The textured handle scales made of black G-10 or green canvas composite material are CNC milled from solid material. Both materials are extremely durable and resistant to mechanical stress as well as other external environmental influences. According to Pohl Force standard, the tang is provided with a SRM (Surface Round Milling) that realizes a high grip comfort. Easy access to the cavity of the handle is made possible with the included key. As with the CNC-Tec Edition of MOVIE KNIVES, the MK-9 Legacy will be built to strict specifications in close cooperation with our European manufacturing partner Lionsteel. The multiple winner of the 'Blade Manufacturing Award' is a guarantee for outstanding quality. The very high-quality and elaborately designed leather sheath of the knife is another highlight. Our manufacturing partner is the renowned company Radar 1957 - Italy, one of the leading manufacturers of holsters for the police and military sector. Based in Tuscany, near Florence, the company looks back on almost 70 years of experience. A homage to the beginnings is also the diamond knife sharpener, which completes the leather sheath of the MK-9 Legacy. The American classic is manufactured by Eze-Lap from Carson City, Nevada. The solid brass harmonizes perfectly with the warm brown tone of the fine leather sheath. A sturdy leg strap is also included. The scope of delivery also includes an anniversary patch, eight lobby cards, a vintage flyer and a high-quality collector's pouch. This has a 2-way zipper (lockable) as well as a Velcro area for patches. Perfect for secure transport or as a pad to display the MK-9 Legacy. The First Production Run is limited to 300 copies of each version and marked accordingly. Technical Data: Overall Length: 386 mm | 15.2 inches Blade Length: 230 mm | 9.06 inches Blade Thickness: 6,2 mm | 0.244 inches Weight: 480 g | 16.93 oz. Blade Steel: Niolox Blade Finish: Bead Blasted Handle Material: G-10, color: black Sheath Material: Leather sheath with leg strap and Eze-Lap diamond sharpener Scope of delivery: MK-9 Legacy with leather sheath, Eze-Lap diamond sharpener, leg strap, lanyard, tool for loosening the handle screws, Pohl Force collector's pouch, Pohl Force rubber patch, 8 lobby cards, vintage flyer

€695.00* €795.00* (12.58% saved)
Ensure 695 bonus points

Wird vor Weihnachten geliefert

%
back on stock
Signature Series - Erbach Sword
Introducing the Signature Series by Windlass! Some of our all-time favorites, reissued by Windlass Steelcrafts® with several upgrades! The blade has improved distal taper, making the sword livelier and quicker. The scabbard now has a wooden core underneath the leather exterior. The grip features leather that is dimpled using a historically authentic "wet-wrap" process, during which fine cord is tightly wrapped around a wet leather grip. When it's dry, the cord is removed and the leather is left attractively indented and provides improved texture and grip. This sword rests in the German Schloss Erbach Armoury and is a fine example of a high medieval/renaissance sword (classified as an Oakeshott type XVIII A). This is truly a beautiful example of a bastard sword, effective in the cut and the thrust. The steel parts are highly decorative and the high carbon steel blade is lightly hollow ground, giving the sword a great feel with one or two hands. Made by Windlass Steelcrafts®. The leather grip and scabbard are brownish black. Original can be seen in Records Of The Medieval Sword by Ewart Oakeshott. SPECIFICATIONS: Overall Length: 44-5/8" Blade Length: 36" Blade Width: 2" Blade Thicknes: 3⁄16" Blade Distal Taper: 1/16” Point of Balance: 3-3/4” from guard Wt: 2 lbs, 12 oz Blade Material: 1075 high carbon steel

From €287.20* €359.00* (20% saved)
Ensure 288 bonus points

Wird vor Weihnachten geliefert

%
Vikings - Ragnar's Sword of Kings
The Sword of Kings is a relic held by the reigning Viking king during the time of Ragnar Lothbrok. The age and origins of the sword are unknown, but it is a treasured symbol of Viking power. The hilt is adorned with precious jewels and the blade, mirror polished, is etched with Viking runes that translate to Sword of Kings:King Horik plotted to exterminate Earl Raganr and his entire blood line so that there would be no one to rise against him. Floki played the part of a betrayer, but in the end stood with his friend and Viking earl, Ragnar, to stop and defeat King Horik. Now Ragnar has become the great Viking leader and champions his people to many epic victories with the treasured Sword of Kings at his side.The handle is adorned with yellow, orange, ruby red and mother-of-pearl colored gemstones that create an ornate look. The stainless steel blade has a mirror polish and is etched with Viking runes that lead to the sword of kings. The knob and the guard are made of cast zinc. This decorative sword comes with a wooden plate for hanging. Details: Total length: 100 cm Blade material: 420J2 stainless steel Weight: 1.6 kg

From €103.20* €129.00* (20% saved)
Ensure 104 bonus points

Item is normally available in about 10-14 days.
A delivery before Christmas cant be guaranteed

%
back on stock
Maldron Viking Sword - Battlecry Collection
The Maldon Viking sword from Windlass Steelcrafts Battlecry collection is a light, agile and resilient fighting blade that captures nearly everything that made this style such a formidable and near legendary design. Created to deal with shields, mail and thick fur or leather armor, it was more than a match for any hand-weapon of its day. Its semi-rounded point was capable of forcefully biting into targets without snagging or catching while its well-honed edge, neither too wide nor too narrow, enabled the widest possible array of single-hand combination blows. Its snub-hilt with distinct lobed-pommel gave the wielder a snug grip facilitating a quick center-of-rotation easily manipulated for exceptionally versatile action. With its capacity for delivering rapid single-handed strikes, it was ideal for fighting armed with a shield but also highly effective when matched with a sax or even a hand-axe. This a sword well-suited to any hand. Given a unique shadowed hue, one can well imagine a blade like the Maldon purposely darkened for a Northern nighttime skirmish. Serving a pivotal part in Norse martial heritage, it's easy to see why this style was so feared and so influential. Includes a matching scabbard with belt stop, custom packaging and certificate of authenticity signed by each smith that touched your blade through every step of the forging process. Details: Overall Length: 36-1/2" Blade Length: 30-5/8" Blade Width: 1-7/8" Blade Thickness: Weight: 2 lbs / 6 oz Grip Length: Point of Balance: 6-1/2" Below Hilt Steel: 1065 High Carbon Edge: Sharpened

From €239.20* €299.00* (20% saved)
Ensure 240 bonus points

Delivery before Christmas

%
Kingston Arms by Hanweis
Atrim Design Type XIIIa War Sword
Based on Oakeshott's Type XIIIa specification these swords were used in the 12th to early 13th Century in that transitional period from hardened leather to mail with some plate armor protecting vital areas of the body.We spent a lot of time discussing with Gus his methodology for developing what he would call a "performance-oriented" sword. Without getting too deep into it Gus, along with Tinker Pearce, was one of the pioneering sword makers to incorporate the notion of harmonic balance into his sword designs. Informed by historical examples and his own experimentation Gus has been making swords for decades now that seem to float in your hand. For this sword Gus left the aesthetics and materials up to us, it was the design (weight, balance, taper, harmonics) we had to get right. It took several rounds of samples (not to mention a botched first run) but we finally nailed it.Not satisfied with just getting the design right we wanted to push it farther. We had the fundamentals down but chose to take the materials and fit and finish a step ahead. The blade is hand forged mono-tempered 9260 spring steel, flat ground with a handsome satin finish. The fittings are high quality stainless steel exactly matching Gus's design. The grip is a solid wood core, cord-wrapped for strength with a textured leather over-wrap. The scabbard is a solid wood core, with stainless steel chape and stitched leather wrap. Details: Total: 110 cm Blade length: 83 cm Handle length: 25 cm Weight: 1.47kg Balance point: 15 cm Blade steel: 9260

€447.20* €559.00* (20% saved)
Ensure 448 bonus points

Delivery before Christmas

%
German War Hammer
The proliferation of plate armour across Medieval Europe was shadowed by the development of crushing weapons like this war hammer. Since swords were virtually useless against plate armour, mounted knights used short hammers, axes and maces to defeat an opponent's improved protection. This beautiful, impressive weapon is replicated from an example in the German National Museum in Nuremberg. The steel head is secured to the hardwood shaft with steel langets. Brass tacks provide a more secure grip. Details: Total length: 21.5" Head: 5" Weight: 2 lbs.

€71.20* €89.00* (20% saved)
Ensure 72 bonus points

Delivery before Christmas

%
One Piece - Gol D Roger - Ace Sword with Sheath (Brown Handle), Handforged
"One Piece" is a groundbreaking anime and manga series that has captured the hearts of millions of fans worldwide. This epic tale follows a group of pirates on a quest to find the greatest treasure in the world, known as the "One Piece." The series is renowned for its captivating characters, action-packed battles, and breathtaking adventures. Gol D. Roger: The Legend of the Pirate King Gol D. Roger, also known as the "Pirate King," is a central figure in "One Piece." He was the only pirate to ever successfully sail through the treacherous waters of the Grand Line and discover the One Piece. Roger was famous for his unwavering courage, sharp intellect, and incredible strength. His legacy inspired generations of pirates, including Monkey D. Luffy, the series' protagonist. The Ace Sword: An Heirloom of Legend The Ace Sword embodies an impressive relic from the era of the Pirate King. This sword symbolizes the nobility and power of Gol D. Roger himself. Crafted by the finest blacksmiths of the Grand Line, it features a unique, intricately designed hilt reminiscent of the sail of a pirate ship. The Ace Sword is distinguished by its exceptional sharpness and durability. It has been wielded in numerous legendary battles, consistently proving that it grants its worthy wielder the strength and determination of a true pirate. This sword is not just an impressive collector's item but also a symbol of the adventurous spirit and unwavering quest for freedom that make "One Piece" unforgettable. Possess the Ace Sword and bring a piece of Gol D. Roger's legendary history and his pursuit of the One Piece into your home. Experience the magic of "One Piece" and the strength of Gol D. Roger with the Ace Sword, an heirloom that keeps the legend alive. Get this unique sword today and step into the shoes of the greatest pirates to ever rule the seas. Details: Total length: 86.5 cm with sheath: 92.5 cm Blade length: 65.5 cm Handle length: 14.5cm Weight: 0.84kg with sheath: 1.08 kg Blade material: Handforged Steel Handle material: Hardwood with brown cord Sheath Matetial: Hardwood Fittings Materials: Bronze Please note: The product images show the decorative version of the sword, the hand-forged version will have a silver sharp blade.

€127.20* €159.00* (20% saved)
Ensure 128 bonus points

item is available on 29.04.2025 . preorder now

%
The Lord of the Rings - Aragorn's Ranger Sword
United Cutlery presents Strider's Ranger Sword, the collectible reproduction sword featured in the Lord of the Rings films. Strider (also known as Aragorn) is the son of Arathorn, and heir to the Kingdom of Gondor. His ancestor, Isildur, was the King who cut the Ring of Power from the hand of Sauron with the sword Narsil. Strider has served as a Ranger and joins the Fellowship to destroy the Ring that threatens his countrymen. Details: Overall Length: 120 cm Blade Length: 91.44 cm Blade Thickness: 0.64 cm Blade Material: Tempered 420 J2 stainless steel, false-edged. Handle Material: Solid metal crossguard and pommel, antique metal finish, genuine leather-wrapped grip, rat-tail tang construction. Plaque: 27 cm x 33.66 cm x 1.9 cm wood, silkscreened with the heraldic insignia of the Kingdom of Gondor.This sword is an official item produced by United Cutlery under the licence of New Line Cinema! Please Note: The matching sheath for the sword can be found here.

€295.20* €369.00* (20% saved)
Ensure 296 bonus points

Delivery before Christmas

%
Hobbit Rivendell Elf Helm with Stand
This authentically detailed replica is a reproduction of the actual filming prop used in the motion picture, THE HOBBIT: THE DESOLATION OF SMAUG™, built by Weta Workshop of New Zealand. The helm is crafted of reinforced polyresin, with precisely-molded details and coloring, including weathering and aging effects. It is presented with a polystone and wood display, sculpted in the shape of the Rivendell guard neck and shoulder armor. It includes a certificate of authenticity. Details: Leather chin strap Leather padded interior Individually serial numbered

€399.20* €499.00* (20% saved)
Ensure 400 bonus points

Delivery before Christmas

%
Steel Vambraces
This steel lower arm guard will go with a large range of period outfits and weapons. It is nicely formed and lined with leather. Straps on the inner arm adjust to fit just about anyone. When the head and hands were protected by armor, the lower arm was one of the prime targets in swordplay. In many cases it was the only piece of armor worn, most often along with a mail shirt. Details: Size: 9 1/4" x 6 1/4" Weight: 1 lbs. 10 oz

€71.20* €89.00* (20% saved)
Ensure 72 bonus points

Delivery before Christmas

%
Primitive Bowie
Early bowie knives were large, tough and sharp. With this knife you can cut down a 4" sapling in no time and the blade would still shave. The blade features a needle point. The brass strip on spine is an intentional device designed to catch the edge of an attacker's blade during a parry. Details: Blade length: 13" Blade width: 2 3/8" Blade thickness: 3/16" Handle length: 5 1/4" Guard length: 4 3/4" Weight: 1 1/2 lbs.

From €79.20* €99.00* (20% saved)
Ensure 80 bonus points

Delivery before Christmas

%
Quebec Two - Finale Edition
With the limited final edition, the classic Quebec Two mission knife leaves the Pohl Force product range! The Quebec series from Pohl Force is a classic mission knife that has been at the top of company founder and designer Dietmar Pohl's wish list for many decades. Back in 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation. Developed as a Ground Forces Combat & General Purpose Weapon, the all-purpose knife was designed for the U.S. Marine Corps in the early 1950s. While officially never introduced, it clearly demonstrated its capabilities in the Vietnam War - mostly in the hands of U.S. Special Forces. Nearly 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of classic old school design with modern high tech manufacturing. Designer Dietmar Pohl revised the design of the Quebec One and expanded the functional range of the knife. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium content and thus significantly improves the cutting and corrosion resistance. In addition, Dietmar Pohl has optimized the blade of the classic once again. The new version now has a 10 mm longer cutting edge and a secondary edge on the spine. Furthermore, the Pohl Force Prepper System was integrated into the handle of the Quebec Two to securely store survival items inside the handle. A tool for loosening the handle screws is included. A significant increase in use is made possible by the new sheath system from Pohl Force. The very elaborately manufactured sheath made of 2.5 mm thick Kydex® with belt adapter and leg strap allows a high carrying comfort. To secure it to the hand, the Quebec Two is equipped with a lanyard. All in black, the Quebec Two is equipped with a modern Black TiN coating. The Kydex® sheath is also in matching black. The Quebec Two - Final Edition is limited to 125 pieces worldwide and features a special laser engraving on the blade. Each knife has its individual limited edition number above the crest. The scope of delivery includes the Quebec Two patch matching the laser engraving. Technical data: Overall length: 315 mm | 12.40 inches Blade length: 190 mm | 7.48 inches Blade thickness: 6 mm | 0.236 inches Weight: 380 g | 13.40 oz. Blade steel: D2 Blade Finish: TiN Coating Handle material: G-10 Sheath: Kydex® sheath with belt adapter and leg strap (fits belt widths up to 5mm) Scope of delivery: Quebec Two - Final Edition with Kydex® sheath, leg strap, lanyard, tool for loosening handle screws, Quebec Two patch

€207.20* €259.00* (20% saved)
Ensure 208 bonus points

Wird vor Weihnachten geliefert

%
Maciejowski Chopper
Back by popular demand! No known historical name exists for this unique sword! It appears in the Maciejowski Bible, a Medieval manuscript that depicts that illustrates Bible stories with Medieval clothing and weapons. This weapon also appears in other manuscripts from the period. Our version can be seen on plate 21 entitled The Rescue of Lot. The single-edge blade is broad and flat while the two-handed grip provides a tremendous amount of leverage, generating a large amount of force. Hand forged of high-carbon steel by Windlass Steelcrafts® with wooden scales on the grip and antiqued copper fittings. This single-edged chopper has been hand-forged of 1075 high carbon steel. SPECIFICATIONS: Overall Length: 32" Blade Length: 19-1/4" Blade Width: 3-1/2" Blade Thickness: 3/16" Weight: 3lbs/7oz Material: 1075 High Carbon Steel

From €207.20* €259.00* (20% saved)
Ensure 208 bonus points

Wird vor Weihnachten geliefert

%
back on stock
Signature Series - Arbedo Sword
Introducing the Classic Series by Windlass! Some of our all-time favorites, reissued by Windlass Steelcrafts® with several upgrades! The blade has improved distal taper, making the sword livelier and quicker. The scabbard now has a wooden core underneath the leather exterior. The grip features leather that is dimpled using a historically authentic "wet-wrap" process, during which fine cord is tightly wrapped around a wet leather grip. When it's dry, the cord is removed and the leather is left attractively indented and provides improved texture and grip. In Arbedo on June 22, 1422 the famous Milanese cavalry commander Carmagnola, along with Angelo de la Pergola, 6,000 horsemen and 4,000 footmen, attacked an army of 4,000 Swiss pikemen and halberdiers. As the battle raged on, a group of Swiss foragers wandered near the scene. Both Carmagnola and de la Pergola thought the foragers were another army and pulled back, allowing the Swiss to retire in good order. This bloody, rather inconclusive battle left a large percentage of Swiss dead, although Carmagnola's army actually lost more men. We've named this beautiful type XVIIIa war sword after that battle at Arbedo, where either side would have carried it. The effective cutting blade tapers to a sharp, deadly point. The 6" grip allows for one or two hand use. High carbon steel blade. Steel guard and pommel. Grip is wood, wrapped with cord and then covered with red leather. Wide tang construction. Original rests in the Metropolitan Museum and can also be seen in "Records Of The Medieval Sword", pg. 189 by Ewart Oakeshott. Leather scabbard. SPECIFICATIONS: Overall Length: 39-1/2" Blade Length: 30-13/16" Blade Width: 2-3/4" Blade Thickness: 3/16" Blade Distal Taper: 1-16" Point of Balance: 4-1/4" from guard Weights: 3 lbs Blade Material: 1075 High carbon steel

From €239.20* €299.00* (20% saved)
Ensure 240 bonus points

Wird vor Weihnachten geliefert

%
Guthwine The Sword Of Eomer
Éomer was a captain of the king’s cavalry, Marshal of the Mark, and one of Rohan’s mightiest warriors. He skillfully wielded his royal sword, Gúthwinë, and used it to slay many Orcs and Uruks of Isengard that dared trespass into Rohan. He bravely fought alongside King Theoden against the forces of Mordor at the battle of Helm’s Deep and on the Pelennor Fields. In the final stand against the dark lord Sauron, Éomer fought alongside Aragorn with the armies of Rohan and Gondor at the Gates of Mordor. This authentically detailed replica is a reproduction of the actual filming prop built by Weta Workshop and used in The Lord Of The Rings films presented by New Line Cinema. This 34” long sword was made using only the finest grade materials and craftsmanship available. It features brass-finished, cast metal hilt parts, a genuine leather-wrapped grip, and a 27” stainless steel blade with engraved fuller grooves. The sword comes ready to mount on a wall display (mounting hardware and instructions included) decorated with graphic motifs of the Rohirrim and includes a certificate of authenticity. Details: Total length: 86 cm Blade length: 68 cm Material: stainless steel Including Wall Display This sword is an original Lord of the Rings sword made by United Cutlery!

€311.20* €389.00* (20% saved)
Ensure 312 bonus points

Delivery before Christmas

%
Game of Thrones - Dark Sister, Sword of Daemon Targaryen
When Aegon the Conqueror flew to Westeros he rode the great dragon Balerion the Black Dread and he carried that ancient Valyrian Steel sword Blackfyre that was the sword of his house. However, he was also accompanied by his sisters, who were also his wives. It was his sister, Visenya, who rode the dragon Vhagar and assisted her husband-brother in his conquest of Westeros carrying her own Valyrian Steel blade known as Dark Sister. Dark Sister was smaller and more elegant than Blackfyre, with a thinner blade making it perfect for use by Visenya however larger men would use it after her. She first passed it to her son Maegor the Cruel, until Maegor was given Blackfyre instead. Dark Sister would continue to be given and used by Targaryen princes, heirs, and second sons, finally being placed in the hands of Daemon Targaryen as a reward for his military prowess. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones®. It is made of stainless steel and includes a certificate of authenticity and a display plaque. The House of the Dragon® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic House of the Dragon®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props. Each sword is serialized and will come with a wall mount and a certificate of authenticity. This item is not a toy, please keep out of the reach of children. This replica sword is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2024 Home Box Office, Inc. All Rights Reserved. HOUSE OF THE DRAGON and all related characters and elements © & ™ Home Box Office, Inc. (s24). Produced under License by Jalic Inc. Details: Overall Length: 44" Blade Length: 32" Blade Material: Stainless Steel Hilt: Leather wrapped grip, cast metal handle parts. Plaque: Silkscreened Wood with Targaryen sigil

€319.20* €399.00* (20% saved)
Ensure 320 bonus points

item is available on 30.12.2024 . preorder now

%
Towton Schwert - Signature Series
Introducing the Signature Series by Windlass! Some of our all-time favorites, reissued by Windlass Steelcrafts® with several upgrades! The blade has improved distal taper, making the sword livelier and quicker. The scabbard now has a wooden core underneath the leather exterior. The grip features leather that is dimpled using a historically authentic "wet-wrap" process, during which fine cord is tightly wrapped around a wet leather grip. When it's dry, the cord is removed and the leather is left attractively indented and provides improved texture and grip. In the winter of 1461, the yet uncrowned Edward IV marched a large Yorkist (the white rose of the “War Of The Roses”) army northward to attack the Lancastrian forces (the red rose) of the legitimate King Henry VI. Although they launched an attack on the Lancastrians’ strong position on an uphill slope at Towton, the Yorkist forces were aided by a blinding snow storm at their backs; the Yorkist archers were able to kill at a range that the Lancastrian arrows were unable to match. The 20,000 royalists charged downhill into their tormentors. The next six hours witnessed thousands fall in one of the bloodiest battles ever to take place on English soil. We have named this sword for that fearsome battle. The blade tapers to an excellent stabbing point and is fullered for most of its length for lightning speed. On foot it could be used with two hands, delivering terrible cuts and thrusts. From horseback its perfect balance and weight still allowed for one-hand blows of equal devastation. Truly a joy to hold, the long graceful pommel, wood and leather grip are nicely complimented by the elegant curves of the crossguard. Flexible and well-tempered, this is sure to become one of your new favorites. Scabbard included. SPECIFICATIONS: Overall: 44-1/2" Blade Length: 36" Blade Width: 2" Blade Thickness: 3/16" Blade Distal Taper: 1/16” Point of Balance: 3-3/4” from guard Wt: 2 lbs/10 oz Blade: 1075 High Carbon Steel

From €287.20* €359.00* (20% saved)
Ensure 288 bonus points

Wird vor Weihnachten geliefert

%
back on stock
Roman Centurion Gladius
This beautiful Centurion gladius has a hand forged and tempered high carbon steel blade; it is truly worthy of a Roman officer. All antiqued parts are meticulously hand finished of solid wood with metal accents to complete this regal piece. Features a baldric with a custom wood scabbard wrapped in leather and accented with real metal detail. Overall Length: 28" Blade Length: 19-1/2" Blade Width: 1-15/16" Blade Thickness: 3/16" Weight: 1lb/11oz Grip Length: 4-1/2" Material: 1065 High Carbon Steel

From €191.20* €239.00* (20% saved)
Ensure 192 bonus points
%
MK-11 Desert - Only 55 copies worldwide!
Limited special version of the MK-11 concept design with a Kydex® sheath in the colour FDE (Flat Dark Earth) and a matching lanyard of the knife. Including high-quality collector's pouch XXL. Only 55 pieces are available worldwide! Delivery while stocks last. The knives are part of the limited MK-11 series with the corresponding serial number "... of 600". In the film "Last Blood®," the former Special Forces and Vietnam fighter uses a variety of different combat knives. More than in any other film in the five-part action series (1982-2019). Designers Dietmar Pohl and Stoil Manchev were given the great privilege of using unusual and contemporary designs. Impressively staged by the main actor, they already count among true classics. Over the past four years, a third MOVIE KNIFE concept design has been slumbering in Dietmar Pohl's very personal design archive. Due to the enormously short lead time to filming in the fall of 2018, it had no longer been possible to realize it and present it to the film star and the production team. In July 2022, however, Dietmar Pohl surprised the action hero on his 76th birthday with the first prototype of the MK-11, which can be both a tool and a weapon. In the fall of 2022, the legendary action series will celebrate its 40th anniversary (1982-2022). For this special occasion, Pohl Force is producing the MK-11 concept design in a numbered and strictly limited series of only 600 pieces worldwide. MK-11 Last Blood® Concept - when Dietmar Pohl got to read the script at short notice in 2018, he very quickly realized how determined the action hero wanted to go into battle using all means. It had to be a design with which one could hack, stab and also strike with great force. The idea of such a special means of action was well known to designer Dietmar Pohl from the armament of British commandos in World War II. In his professional career, he worked intensively with Colonel Rex Applegate, among others, who shared his expertise with him. Applegate is still considered one of the most recognized experts in the field of armed close combat. With the MK-11, Pohl Force takes the philosophy of this early command weapon and brings it into the 21st century with contemporary materials and manufacturing processes. 6 millimeter thick and highly durable D2 steel with a Rockwell hardness of 59-60 HRC give the 26.3 centimeter long blade superior cutting performance and durability. To protect against reflections and corrosion, the MK-11 is additionally coated with a black PVD coating. For the CNC-manufactured handle made of impact-resistant G-10, Pohl adopted the proven handle design of its MK-9 combat knife, but dispensed with the additional subhilt. As with the MK-8 and MK-9, the handle ends with a precisely milled striking element. In order to be able to carry the MK-11 optimally in the field, the scope of delivery includes a very elaborately manufactured sheath made of 2.5 mm thick Kydex®. The two leg straps allow a comfortable attachment to the thigh. To secure the MK-11 to the hand, it is equipped with a knotted lanyard. Technical Data: Overall Length: 404 mm | 15.91 inches Blade Length: 263 mm | 10.35 inches Blade Thickness: 6 mm | 0.236 inches Weight: 600 g | 21.16 oz. Blade Steel: D2 Blade Finish: PVD Coating Handle Material: G-10 Sheath Material: Kydex® sheath with belt adapter and two leg straps (fits belt widths up to 55mm) Scope of delivery: MK-11 Desert with Kydex® sheath in color FDE, two leg straps, lanyard, collector's pouch xxl, photo print Care instructions: The blade of the MK-11 Last Blood Concept® is made of D2 (1.2379) tool steel, which has enormous cutting durability, but requires a certain amount of basic care due to the chrome content of 11.8 %. Corrosion can occur in the absence of proper maintenance. For prevention, the knife should be cleaned, dried and re-oiled regularly to prevent rust and corrosion. Especially when the knife comes into contact with uncertain substances or acidic liquids or marine environment.

€299.00* €369.00* (18.97% saved)
Ensure 299 bonus points

Delivery before Christmas

%
The Lord of the Rings - The Sword of Faramir
This authentically detailed sword replica is a reproduction of the actual filming prop sword crafted by Weta Workshop of New Zealand and used in THE LORD OF THE RINGS™ films presented by New Line Cinema. This meticulously detailed sword, with an overall length of 42", features a solid metal guard and pommel with an antique steel finish and a genuine leather wrapped grip. The cross guard is adorned with gold twin raven motifs and the pommel is accented with gold rings. The 33" false-edged blade is crafted of tempered stainless steel with a fuller groove. Each sword is presented with a wood wall display and certificate of authenticity. Details: Total length: 106.68 cm Blade length: 83.82 cm Blade material: stainless steel

€287.20* €359.00* (20% saved)
Ensure 288 bonus points

Delivery before Christmas

%
Frontier Tomahawk-Pfeife
Pipe tomahawks are artifacts unique to North America, created by Europeans as trade objects but often exchanged as diplomatic gifts.They were symbols of the choice Europeans and Native Americans faced whenever they met: one end was the pipe of peace, the other an axe of war.This reproduction of a historical tomahawk pipe has a handle uniquely wrapped with spiked brass bands.Tomahawks were used as both weapons and ceremonial objects and were created in an astonishing variety of shapes. Some were plain, and some were ornate, but they were all used by Native Americans for war, torture, trade, and ritual, including sealing treaties and alliances.This representation of America's past is fully functional, with a head forged of high carbon steel and a hand-carved wooden handle featuring hand-embellished linework. This reproduction displays a handle uniquely wrapped with studded brass bands. This is a functional pipe with a drilled handle SPECIFICATIONS: Representation of America's past Fully functional Hand-carved wooden handle with studded brass bands Functional pipe with a drilled handle Overall: 24" long Head: 10" long from blade edge to pipe rim Weight: 2 lbs / 2 oz Material: head forged of high carbon steel

From €103.20* €129.00* (20% saved)
Ensure 104 bonus points

Delivery before Christmas

%
Masterpiece Collection Rambo First Blood Standard Edition
We are proud to present the Rambo knives Masterpiece Collection™, the finest Officially Licensed Rambo knives ever produced. No detail has been spared to make these knives the most accurate and highest quality licensed Rambo knives ever made. Featured prominently in First Blood, this is an exact reproduction of the knife used by Sylvester Stallone in this classic action movie. Each knife measures 14" in overall length and features a top quality 420 stainless steel blade with slotted saw teeth, a hollow handle with survival kit, aluminum butt cap with precision compass and a double screwdriver guard. For the first time ever the knife features 14 saw teeth – accurate to the knife used in the movie, instead of the 12 on previous reproductions. The front section of the blade now has the more complex grind of the knife used in the movie, rather than the simplified version offered previously. • The sheath has a sharpening stone in a leather pouch on the front like the one used in the movie. • Survival Kit has a Survival Kit Silencer™, to prevent noise caused by the Survival Kit moving in the handle of the knife. • The knife comes in high quality packaging with a custom EVA foam insert to prevent any movement of the knife in transit. This museum quality replica has been hand crafted with pride from the finest materials available and comes complete with a high quality buffalo hide leather sheath. Specifications: • 14" overall length. • Top quality 420 stainless steel ¼" thick blade with center slotted saw teeth and matte satin finish. • Hollow handle wrapped in heavy O.D. green nylon cord with waterproof O ring and survival kit with Survival Kit Silencer™ • Movie accurate 14 sawteeth • Stainless steel guard with lashing holes. • Non-magnetic aluminum butt-cap with precision compass. • Phillips and standard screwdriver points. • High quality top grain genuine Buffalo hide leather sheath with leg tie. • Sharpening stone in leather pouch on

€159.20* €199.00* (20% saved)
Ensure 160 bonus points

Delivery before Christmas

%
The Lord of the Rings - Rohan Banner
Embrace the legacy of Middle-earth with this officially licensed Lord of the Rings Rohan Banner, a striking tribute to the horse-lords of Rohan. Made from durable nylon cloth, the banner is designed for longevity and features the iconic horse and sun motif that symbolizes the Rohirrim's deep connection to their beloved steeds. Measuring an impressive 167 cm in length and 40 cm in width, it arrives ready to display with an elegant wooden hanging rod. Rohan’s culture, built on the breeding and trading of horses, is captured in every detail of this banner, making it a must-have piece for fans of Tolkien’s world. Perfect for collectors and enthusiasts alike, it adds a touch of the noble kingdom of Rohan to any home or collection. -Official Lord of the Rings item -Made by United Cutlery - known for exceptional quality and attention to detail Perfect for fans, collectors and anyone who loves the world of Middle Earth!

€63.20* €79.00* (20% saved)
Ensure 64 bonus points

item is available on 27.02.2025 . preorder now

%
Sword of Thranduil
The sword of the Elvenking was one of two twin swords crafted for Thranduil by the finest smiths of the Woodland Realm. The blade and flowing hilt are forged with engraved vine and leaf symbols representing the forests of the Greenwood, all forged from a single piece of silver Elven steel. This replica features a stainless steel blade and cast metal hilt with authentic detailing to precisely match the movie prop. It is presented with a wood wall display featuring graphic motif of Thranduil.

€295.20* €369.00* (20% saved)
Ensure 296 bonus points

Delivery before Christmas

%
Late 15th Century Arming Sword - Royal Armouries Collection
This arming sword in the Royal Armouries Collection dates to the late-15th century and is likely to be of English provenance. This type of sword is a medium-to-high status sidearm of the late-15th century and into the early 16th century, and would have been worn both with and without armour. It would have been a knightly backup weapon, used in combat both on foot and mounted. This sword shares some obvious similarities with the Westminster Abbey sword, which has been long associated with Henry V (but now believed to be from Henry VII's funeral achievements). It also shares a number of close similarities with other swords from English churches, and from representations of swords on English funeral effigies and brasses. Due to the state of preservation, it has been suggested that this sword may indeed have been taken from an English church monument in past centuries, where it was likely originally deposited in the late-15th century. Our replica is a precise, faithful replica, manufactured traditionally in very similar ways to the original. It features a robust cut and thrust Oakeshott Type XVIII blade of just over 30 inches, long curved quillons with characteristic terminals, short grip and prominent solid wheel pommel. The original has some unusual floral engraving at the base of the blade, which we have not replicated, because unfortunately on the original it is too damaged to reproduce with any certainty. The sheath is made with a wood body and covered with leather. The tip is reinforced with a brass chape that features ornate cut-outs and an acorn tip. At the throat, the leather extends upward and covers part of the guard at the ricasso. Made by Windlass Steelcrafts, the original can be seen in the Royal Armouries Collection, Object Number IX.1426. Includes a certificate of authenticity on heavy stock SPECIFICATIONS: Overall Length: 37-1/4" Blade Length: 30-5/8" Blade Width at Ricasso: 1-3/4" Blade Distal Taper: 1/32" Weight: 2 lbs, 13 oz Material: 1075 high carbon steel Edge: Double-edged with bevels, unsharpened Balance Point: 3-11/16" from guard

From €439.20* €549.00* (20% saved)
Ensure 440 bonus points

Wird vor Weihnachten geliefert

%
back on stock
A.P.O.C Atrim Tactical Jian
The Atrim Tactical Jian represents further evidence of Gus Trim’s knowledge of shaping steel with form and balance. Incredibly light and graceful, the Tactical Jian gently glides through the air with little resistance and rests well in the hand for easy thrusts and swings. The 26 ½” blade is counter balanced by the 6 ½” handle and features a traditionally shaped design which can double as a skull cracker for those less enlightened opponents. Possessing all the features known to APOC swords, this will be a welcome additional to your Gus Trim APOC collection.The black textured fiberglass sheaths are fitted to a Molle compatible kydex platform that allows you to secure your swords to belt or pack in multiple carry positions. For belt or sling carry setups the platform has four slots 1 3/8" long and 1/8" wide. A notch in the handle and the platform allows for stealth unsheathing as well as locking the sword securely for inverted maneuvers. No preparations for the end times are complete without an APOC tactical sword for when the bullets run out, the knives are too short and your life is on the line. Details: Overall: 34 1/2" Blade Length: 26 1/2" Handle Length: 6 1/2" Weight: 2 lbs Point of Balance: 3" Thickness at Guard: 7.4mm Thickness at Tip: 4.2mm Blade Steel: 9260 Handle Material: G10

€231.20* €289.00* (20% saved)
Ensure 232 bonus points

Delivery before Christmas

%
A.P.O.C. Survival Broad
After everything hits the fan and the muck has settled, all the symbols that represented the best man had to offer (honor, compassion, liberty, truth, trust, dignity, integrity, justice) are laid waste to give way to what now matters most: survival. In the twilight of man’s morality, a new symbol emerges to bring law to the foreboding chaos to come .. the A.P.O.C. Broad Sword. Birthed in a design reminiscent of a gilded time the Broad Sword strips away the gaudy to give you a cold blade of 21 5/8” edged simplicity of the real and now. Featuring a double cutaway in the blade profile, it’s a single-hand broad sword for a single purpose. The A.P.O.C. Broad Sword’s dexterities are quick, light, strong and sharp with all the features of the series to help you stand alone in broken world. The black textured fiberglass sheaths are fitted to a Molle compatible kydex platform that allows you to secure your swords to belt or pack in multiple carry positions. For belt or sling carry setups the platform has four slots 1 3/8" long and 1/8" wide. A notch in the handle and the platform allows for stealth unsheathing as well as locking the sword securely for inverted maneuvers. No preparations for the end times are complete without an A.P.O.C. tactical sword for when the bullets run out, the knives are too short and your life is on the line. Key Features: 21 1/2" black oxide coated 9260 spring steel blade Full tang, triple riveted G10 handle Light fiberglass scabbard with Molle compatible platform Specifications Overall: 29 1/2" Blade Length: 21 1/2" Handle Length: 6 1/4" Weight: 2 lbs Point of Balance: 5" Thickness at Guard: 5.9mm Blade Steel: 9260 Handle Material: G10 Specs will vary slightly from piece to piece.

€191.20* €239.00* (20% saved)
Ensure 192 bonus points

Delivery before Christmas

%
Sword of Eowyn
Born in Edoras, EowynTM suffered the early death of her parents, and was forced to look after her ailing uncle, King Theoden,TM whose health was rapidly diminishing under the increasing control of SarumanTM and Grima Wormtongue. The beautiful and strong Eowyn was trained as a Shield-maiden, and was considered to have surpassed many Rohirrim men in terms of craft and skill. She carried a full-sized sword, which measured nearly three feet in length, from tip to hilt. The bronze guard and pommel were styled beautifully in honor of the mearas, to improve the grip of Eowyn´s small hand upon the sword. The handgrip was crafted with a raised middle section of three bronze rings. A wide fuller groove runs down 3/4 of the blade to reduce the weight, yet still retain critical blade strength. This type of fuller was common among royal swords of the Rohirrim. Against her uncles wishes, a disguised Eowyn rode with the Rohirrim to the Pelennor Fields along with the hobbit, Merry, in defense of their fallen king. Eowyn achieved true heroism as she succeeded in the slaying of the Witch KingTM and his fell steed, however, she also suffered a heinous injury during the crusade. After being healed by King Elessar, Eowyn finally abandoned her passion for battlefield grandeur and found true love in the arms of Faramir. THE SWORD OF EOWYN TM Includes a parchment certificate of authenticity and a wood display plaque. OVERALL LENGTH: 92.71 cm BLADE LENGTH: 76.52 cm BLADE THICKNESS: 0.64 cm BLADE MATERIAL: Tempered, 420 J2 stainless steel with a fuller grind, false-edged. HANDLE MATERIAL: Solid metal guard and pommel with antiqued brass plated finish, the hilts are cast in the symbols of the famed horses of Rohan and the grip is genuine leather-wrapped, tapered tang construction. PLAQUE: 27.94 cm x 26.99 cm x 1.91 cm wood, silkscreened design of an icon of Rohan. Hardware, instructions included.

€295.20* €369.00* (20% saved)
Ensure 296 bonus points

Delivery before Christmas

%
One Piece Mihawk Scimitar - handforged
Yoru is ornately decorated with a very long blade. On the hilt of this blade is a crossguard, though the bars between the blade and the hilt are much longer than average. The blade itself is Carbon Steel, and its shape is similar to the German "Großes Messer", a single-edged long sword with a slight curve at the end of the blade. Overall, Yoru looks like a large black cross. This sword has a handforged sharp blade. Details: Handle length: 26 cm Blade length: 85 cm Overall length: 118 cm Balance Point: 25 cm below guard Weight: 2100g

€127.20* €159.00* (20% saved)
Ensure 128 bonus points

item is available on 28.11.2024 . preorder now

%
back on stock
Signature Series - Sword of Roven
Introducing the Signature Series by Windlass! Some of our all-time favorites, reissued by Windlass Steelcrafts® with several upgrades! The blade has improved distal taper, making the sword livelier and quicker. The scabbard now has a wooden core underneath the leather exterior. The grip features leather that is dimpled using a historically authentic "wet-wrap" process, during which fine cord is tightly wrapped around a wet leather grip. When it's dry, the cord is removed and the leather is left attractively indented and provides improved texture and grip. Despite having several names - War Sword, Great Sword, Long Sword and even Two-Hand Sword (thus causing some confusion among collectors) - the large sword was quite a popular weapon. This sword has great length giving it both reach and power. As the length increased the velocity increased substantially. However, with the addition of the long ricasso, the sword became even more formidable. The ricasso allowed the sword to be gripped past the guard, thus shortening the sword and allowing it to be used as short spear. This made a thrust more solid since the blade is held securely at two separate points. Our version of this sword is as formidable weapon as the originals. The Sword of Roven has a high carbon steel blade tempered to a tough spring, the grip is cord-wrapped wood wrapped with brownish black leather, and the pommel and guard are steel. Comes complete with leather scabbard. This is an interesting sword type that belongs in all collections of swords. SPECIFICATIONS: Overall: 47-3/4" Blade Length: 37-3/4" Blade Width: 1-13/16" Blade Thickness: 5/32" Blade Distal Taper: 3/32" Point of Balance: 6-11/16” from guard. Wt. 3 lbs, 2 oz Material: 1075 High Carbon Steel

From €159.20* €199.00* (20% saved)
Ensure 160 bonus points

Wird vor Weihnachten geliefert

%
16th Century Italian Cinquedea - Royal Armouries Collection
The cinquedea was a characteristic type of Italian broad-bladed short sword or large dagger, with this example in the Royal Armouries having a longer blade, dating to around 1500-1530. While Cinquedea were often carried as civilian sidearms, and some examples were highly decorated, this example is relatively plain and workmanlike, and could have been carried as a military sidearm by someone like an infantryman or gunner. The impressively broad blade of 26 inches has a complex transition from three down to two fullers, with a thin and distally tapered cross-section which make this a very light and fast weapon for the size. Our replica has faithfully copied all aspects of the form and statistics, the most interesting of which is the unique hilt construction. The ingenious and iconic guard design is fabricated of various components welded together, as in the original. The heel of the blade actually extends completely through the guard and is riveted to it (see photos). The blade heel and rivet heads are then ground flush with the guard and the whole assembly is polished. This method provides exceptional strength and durability. The blade also has a full profile tang, with hardwood grip scales and decorative brass filigree inlaid rivets. The sheath is made with a wood body and covered with leather. The tip is reinforced with a brass chape that features ornate cut-outs and an acorn tip. At the throat, the leather extends upward and covers part of the guard at the ricasso. Made by Windlass Steelcrafts, the original can be seen in the Royal Armouries Collection, Object Number IX.148. Includes a certificate of authenticity on heavy stock SPECIFICATIONS: Overall Length: 31-11/16" Blade Length: 25-7/8" Blade Width at Ricasso: 3-11/32" Blade Distal Taper: 3/32" Weight: 2 lbs, 3 oz Material: 1075 high carbon steel Edge: Double-edged with bevels, unsharpened Balance Point: 4-5/8" from guard

From €439.20* €549.00* (20% saved)
Ensure 440 bonus points

Wird vor Weihnachten geliefert

%
Signature Series - Sword of St. Michael
Introducing the Signature Series by Windlass! Some of our all-time favorites, reissued by Windlass Steelcrafts® with several upgrades! The blade has improved distal taper, making the sword livelier and quicker. The scabbard now has a wooden core underneath the leather exterior. The grip features leather that is dimpled using a historically authentic "wet-wrap" process, during which fine cord is tightly wrapped around a wet leather grip. When it's dry, the cord is removed and the leather is left attractively indented and provides improved texture and grip. Scabbard included. SPECIFICATIONS: Overall Length: 36" Blade Length: 30-1/2" Blade Width: 1-1/8" Blade Tickness: 3/16" Weight: 1 lb, 7 oz Blade Material: 1075 High carbon steel.

From €239.20* €299.00* (20% saved)
Ensure 240 bonus points

Wird vor Weihnachten geliefert

%
Dune - Officially Licensed Dune Crysknife Of Paul Atreides
The Crysknife is the traditional and sacred weapon of the Fremen, the desert warriors of Arrakis. Crafted from razor-sharp sandworm teeth collected in a Fremen rite of passage, the ornate carved blade is etched with intricate glyphs and patterns, making each Crysknife unique and personal to those who have earned the honor of unsheathing it. United Cutlery’s replica knife is an exact reproduction of the actual filming prop used in the movie and is expertly crafted of high-quality polyresin with precisely-molded details, rich coloring and a metallic finish on the handle. The stunning reproduction can be displayed on its polystone wall display, which is sculpted in the form of the hawk sigil of House Atreides. A certificate of authenticity is also included with the Crysknife of Paul Atreides to assure customers of its value and officially licensed status. Details: Cast Polyresin Construction Metallic Finished Handle Total Length: 48,26 cm It is an exact replica, a 3D Scan was made of the screen used prop.

€207.20* €259.00* (20% saved)
Ensure 208 bonus points

Delivery before Christmas

%
Prepper S.E.R.E. II
With the Prepper One series, Pohl Force introduced a completely new knife concept for bushcrafters and outdoor enthusiasts in 2016: Compact in overall size, a blade length that complies with German weapons regulations (below 12 cm) and a hollow handle for storing survival utensils. After just a short time, Dietmar Pohl's design became a real classic in civilian use. In 2023/24, the Prepper One formed the basis for the further development of a completely new generation, which now focuses on the needs of crew members of civilian and, in particular, military aircraft. The term S.E.R.E. (Survival, Evasion, Resistance, Escape) refers to the ability to survive, evade, resist and escape. The Prepper S.E.R.E. II was developed with this application profile in mind. With an overall length of 24.5 cm and a weight of 260 g (without sheath and survival equipment in the handle), it is ideal for equipping a survival vest or a survival pack. The 6 mm thick blade made of German Niolox steel (Friedr. Lohmann GmbH, Witten) gives the Prepper S.E.R.E. II high edge retention, excellent abrasion resistance and good corrosion resistance. In short: maximum reliability in use! The entire blade has been blasted using the "double-blast" process, which is intended to prevent reflections and also make the surface more dense. One completely new feature of the Prepper S.E.R.E. II is the hand guard with screwdriver and slotted hole. The screwdriver protects the cutting edge if you need to unscrew equipment and the slotted hole can be used to attach a cord to a spear. Another new feature is the flat, roughened tang on the back, which can be used both for hammering and for rubbing a firesteel. A key attached to the tang allows access to the inside of the handle. Designer Dietmar Pohl has chosen black G-10 as the handle material, which is neutral in color and matches many areas of application. As with the first Prepper generation, the S.E.R.E. II was manufactured exclusively for Pohl Force by our manufacturing partner Lionsteel in Maniago. The Kydex sheath was skillfully implemented by our Spanish partner according to Pohl Force specifications and received various upgrades. In addition to the 2.5 mm material used as standard at Pohl Force since 2021, the adapter is now secured to the sheath body with four screws instead of two. A handle loop also secures the knife against loss and keeps it closer to the body. Snagging of the handle on the aircraft or bushes on the ground can be virtually ruled out. A 550/type III parachute cord (1 meter long) with a breaking load of 249 kg looped through the eyelets can be used for building traps or other tasks. Blade length 11.8 cm. Collector's pouch included. Technical data: Overall length: 240 mm | 9.45 inches Blade length: 118 mm | 4.65 inches Blade thickness: 6 mm | 0.236 inches Weight: 260 g | 9.17 oz. Blade steel: Niolox Blade finish: Bead Blasted Handle material: G-10 Sheath: Kydex® sheath with belt adapter (fits belt widths up to 55mm) Scope of delivery: Prepper S.E.R.E., Kydex® sheath in black with belt adapter, lanyard, tool for loosening handle screws, Pohl Force collector's pouch,

€335.00* €345.00* (2.9% saved)
Ensure 335 bonus points

Item is normally available in about 4-6 weeks.
A delivery before Christmas cant be guaranteed

%
Game of Thrones - Dark Sister, Sword of Daemon Targaryen - Damascus Edition
When Aegon the Conqueror flew to Westeros he rode the great dragon Balerion the Black Dread and he carried that ancient Valyrian Steel sword Blackfyre that was the sword of his house. However, he was also accompanied by his sisters, who were also his wives. It was his sister, Visenya, who rode the dragon Vhagar and assisted her husband-brother in his conquest of Westeros carrying her own Valyrian Steel blade known as Dark Sister. Dark Sister was smaller and more elegant than Blackfyre, with a thinner blade making it perfect for use by Visenya however larger men would use it after her. She first passed it to her son Maegor the Cruel, until Maegor was given Blackfyre instead. Dark Sister would continue to be given and used by Targaryen princes, heirs, and second sons, finally being placed in the hands of Daemon Targaryen as a reward for his military prowess. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones®. It is made of stainless steel and includes a certificate of authenticity and a display plaque. Dark Sister Damascus is a special collector's limited edition of 2000 pieces. The House of the Dragon® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic House of the Dragon®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props. Each sword is serialized and will come with a wall mount and a certificate of authenticity. This item is not a toy, please keep out of the reach of children. This replica sword is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2024 Home Box Office, Inc. HOUSE OF THE DRAGON and all related characters and elements © & ™ Home Box Office, Inc. (s24). All Rights Reserved. House of the Dragon is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc. Details: Overall Length: 44" Blade Length: 32" Blade Material: High Carbon Damascus Steel Hilt: Leather wrapped grip, cast metal handle parts. Plaque: Silkscreened Wood with Targaryen sigil

€1,039.20* €1,299.00* (20% saved)
Ensure 1040 bonus points

item is available on 30.12.2024 . preorder now

%
back on stock
British 1796 Pattern Light Cavalry Saber
Designed by Major-General John Gaspard Le Marchant, the 1796 pattern light cavalry saber was based on Central and Eastern European hussar swords. As a young captain, he observed the clumsy design of the heavy, overly long 1788 Pattern swords. Le Marchant opined that the "blades of the Turks, Mamelukes, Moors, and Hungarians (were) preferable to any other." He gave the blade of this saber a pronounced curve, which made it more adept at cavalry attack methods, and designed it with a widened tip that affected the balance, but made slashes far more brutal. It was issued primarily to British light dragoons and hussars and was also used by the King's German Legion light cavalry during the Napoleonic Wars. The blade profile became so popular that the Prussians and other German states emulated its design throughout the 19th century.This exact replica of an original antique weighs only 1 lb, 12 oz, and the blade features an extreme distal taper, enabling it to feel exceptionally lively. A full 5/8" thick at the hilt, and tapers to a super thin 1/64", 1" from the tip. The blade is hand forged from tough 1080 high carbon steel and spring tempered and arrives fully sharpened.The hilt replicates the originals, with a 5/8" wide knuckle guard, steel spine, and contoured, ribbed leather grip.Complete with accurately reproduced steel scabbard. SPECIFICATIONS: Overall Length: 37-1/4" Blade Length: 32-1/4" Blade Width: 1-3/4” at the ricasso Blade distal taper: 5/8” thick at the hilt, 1/64” 1” from tip Blade thickness (base): 6 mm Blade width (base): 3.4 cm Blade material: Spring tempered 1080 high carbon Steel Wt: 1 lb / 12 oz

From €239.20* €299.00* (20% saved)
Ensure 240 bonus points

Delivery before Christmas

%
MK-11 Last Blood Concept - Final Edition
The Final Edition comprises the last 100 pieces of the limited MK-11 Last Blood® Concept. Each knife features a laser engraving of the elaborately designed Final Edition logo - an interpretation based on the former MACV-SOG coat of arms. The individual limitation number is shown above it. Another highlight is the patch woven in a very small edition whose color design is based on historical pieces. In the film "Last Blood®," the former Special Forces and Vietnam fighter uses a variety of different combat knives. More than in any other film in the five-part action series (1982-2019). Designers Dietmar Pohl and Stoil Manchev were given the great privilege of using unusual and contemporary designs. Impressively staged by the main actor, they already count among true classics. Over the past four years, a third MOVIE KNIFE concept design has been slumbering in Dietmar Pohl's very personal design archive. Due to the enormously short lead time to filming in the fall of 2018, it had no longer been possible to realize it and present it to the film star and the production team. In July 2022, however, Dietmar Pohl surprised the action hero on his 76th birthday with the first prototype of the MK-11, which can be both a tool and a weapon. In the fall of 2022, the legendary action series will celebrate its 40th anniversary (1982-2022). For this special occasion, Pohl Force is producing the MK-11 concept design in a numbered and strictly limited series of only 600 pieces worldwide. MK-11 Last Blood® Concept - when Dietmar Pohl got to read the script at short notice in 2018, he very quickly realized how determined the action hero wanted to go into battle using all means. It had to be a design with which one could hack, stab and also strike with great force. The idea of such a special means of action was well known to designer Dietmar Pohl from the armament of British commandos in World War II. In his professional career, he worked intensively with Colonel Rex Applegate, among others, who shared his expertise with him. Applegate is still considered one of the most recognized experts in the field of armed close combat. With the MK-11, Pohl Force takes the philosophy of this early command weapon and brings it into the 21st century with contemporary materials and manufacturing processes. 6 millimeter thick and highly durable D2 steel with a Rockwell hardness of 59-60 HRC give the 26.3 centimeter long blade superior cutting performance and durability. To protect against reflections and corrosion, the MK-11 is additionally coated with a black PVD coating. For the CNC-manufactured handle made of impact-resistant G-10, Pohl adopted the proven handle design of its MK-9 combat knife, but dispensed with the additional subhilt. As with the MK-8 and MK-9, the handle ends with a precisely milled striking element. In order to be able to carry the MK-11 optimally in the field, the scope of delivery includes a very elaborately manufactured sheath made of 2.5 mm thick Kydex®. The two leg straps allow a comfortable attachment to the thigh. To secure the MK-11 to the hand, it is equipped with a knotted lanyard. The Final Edition is limited to 100 pieces. The scope of delivery includes the specially designed Final Edition woven patch. Technical Data: Overall Length: 404 mm | 15.91 inches Blade Length: 263 mm | 10.35 inches Blade Thickness: 6 mm | 0.236 inches Weight: 600 g | 21.16 oz. Blade Steel: D2 Blade Finish: PVD Coating Handle Material: G-10 Sheath Material: Kydex® sheath with belt adapter and two leg straps (fits belt widths up to 55mm) Scope of delivery: MK-11 Last Blood® Concept - Final Edition with Kydex® sheath, two leg straps, lanyard, tool for loosening handle screws, patch

€207.20* €259.00* (20% saved)
Ensure 208 bonus points

Wird vor Weihnachten geliefert